3176C, 3196 & 3406E MARINE ENGINES Caterpillar


SECTION 6: Sensor Calibrations

Usage:

P-600: HOW TO USE TESTS

System Operation

Figure P-600.2: How to Use Schematic

Figure P-600.3: How To Use Pin Connector

Functional Test

P-604: THROTTLE POSITION SENSOR CALIBRATION

System Operation

Figure P-604.2 Throttle Position Sensor Schematic

Figure P-604.3 Throttle Position Sensor Pin Connector

Diagnostic Codes Functional Test

P-614: ENGINE SPEED/TIMING SENSOR CALIBRATION

System Operation

Figure P-614.2: Speed/Timing Sensor Schematic

Figure P-614.3: Speed/Timing Sensor Pin Connector

Diagnostic Codes

Functional Test

Caterpillar Information System:

3176C, 3196 & 3406E MARINE ENGINES Section 5: System Functional Tests
3176C, 3196 & 3406E MARINE ENGINES SECTION 4: Troubleshooting With A Diagnostic Code
3176C, 3196 & 3406E MARINE ENGINES SECTION 3: Troubleshooting Without A Diagnostic Code
3176C, 3196 & 3406E MARINE ENGINES Section 2: Programming Parameters
3176C, 3196 & 3406E MARINE ENGINES Section 1: Electronic System Overview
3176C, 3196 & 3406E MARINE ENGINES Quick Reference Sheet For Diagnostic Codes
3406E MARINE ENGINE Testing & Adjusting
3406E MARINE ENGINE Systems Operation
3126 HEUI INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Glossary Of Terms
3126 HEUI INDUSTRIAL ENGINES ENGINES EQUIPPED WIT P-693: Vehicle Speed Calibration And Adjustment
3126 HEUI INDUSTRIAL ENGINES ENGINES EQUIPPED WIT P-621: Analog Sensor Calibration
3126 HEUI INDUSTRIAL ENGINES ENGINES EQUIPPED WIT P-614: Speed/Timing Sensor Calibration
3176C, 3196 & 3406E MARINE ENGINES SECTION 7: Glossary of Terms
3176C ; 3196 Marine Engines Electrical System 3176C & 3196 Marine Engines Electrical System
3176C & 3196 INDUSTRIAL ENGINE Systems Operation
3176C & 3196 INDUSTRIAL ENGINE Testing & Adjusting
MG-5061A MARINE TRANSMISSION Section 1 - Introduction.
MG-5061A MARINE TRANSMISSION Section 2 - Description and Specification.
MG-5061A MARINE TRANSMISSION Section 3 - Operation
MG-5061A MARINE TRANSMISSION Section 4 - Preventive Maintenance.
MG-5061A MARINE TRANSMISSION Section 5 - Trouble Shooting.
MG-5061A MARINE TRANSMISSION Section 6 - Removal and Unit Disassembly.
MG-5061A MARINE TRANSMISSION Section 7 - Cleaning And Inspection.
MG-5061A MARINE TRANSMISSION Section 8 - Subassemblies.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.