Fuel Priming Pump
Usage:
Remove Fuel Priming Pump
1. Remove two bolts (1), and remove fuel priming pump (2).
2. Inspect the gasket, and install a new gasket if needed.
Install Fuel Priming Pump
1. Make sure the gasket is in position for the fuel priming pump.
2. Put fuel priming pump (1) in position on the fuel filter base. Install the two bolts that hold it in place.
Caterpillar Information System:
3406B DIESEL TRUCK ENGINE Tachometer Drive
3406B DIESEL TRUCK ENGINE Electric Starting Motor
3406B DIESEL TRUCK ENGINE Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE Fuel Injection Lines
3406B DIESEL TRUCK ENGINE Air Compressor
3406B DIESEL TRUCK ENGINE Conversion Chart (Inches To MM)
3406B DIESEL TRUCK ENGINE Seals (Hydrodynamic)
3406B DIESEL TRUCK ENGINE Seals (Lip-Type)
3406B DIESEL TRUCK ENGINE Batteries
3406B DIESEL TRUCK ENGINE Gaskets
3406B DIESEL TRUCK ENGINE Bearings
3406B DIESEL TRUCK ENGINE Shims
3406B DIESEL TRUCK ENGINE Fuel Filter And Base
3406B DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE Fuel Ratio Control For Use With Earlier Engines
3406B DIESEL TRUCK ENGINE Fuel Ratio Control For Use With Later Engines
3406B DIESEL TRUCK ENGINE Automatic Timing Advance 7FB1-Up, 4MG1-4MG3599
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3406B DIESEL TRUCK ENGINE Governor
3406B DIESEL TRUCK ENGINE Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE Turbocharger (TV72 & TV78)
3406B DIESEL TRUCK ENGINE Turbocharger (S4A)
3406B DIESEL TRUCK ENGINE Water Temperature Regulator And Manifold