Electric Starting Motor
Usage:
Remove Electric Starting Motor
1. Disconnect the wires from the starting motor.
2. Fasten a hoist to the starting motor. Remove three bolts (1) that hold the starting motor to flywheel housing. Remove the electric starting motor. The weight of the starting motor is 32 kg (70 lb.).
Install Electric Starting Motor
1. Fasten a hoist, and install the electric starting motor on the flywheel housing. Install the three bolts that hold the starting motor to flywheel housing.
2. Connect the wires to the starting motor.
Caterpillar Information System:
3406B DIESEL TRUCK ENGINE Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE Fuel Injection Lines
3406B DIESEL TRUCK ENGINE Air Compressor
3406B DIESEL TRUCK ENGINE Conversion Chart (Inches To MM)
3406B DIESEL TRUCK ENGINE Seals (Hydrodynamic)
3406B DIESEL TRUCK ENGINE Seals (Lip-Type)
3406B DIESEL TRUCK ENGINE Batteries
3406B DIESEL TRUCK ENGINE Gaskets
3406B DIESEL TRUCK ENGINE Bearings
3406B DIESEL TRUCK ENGINE Shims
3406B DIESEL TRUCK ENGINE Rust Preventive Compound
3406B DIESEL TRUCK ENGINE Lubrication
3406B DIESEL TRUCK ENGINE Tachometer Drive
3406B DIESEL TRUCK ENGINE Fuel Priming Pump
3406B DIESEL TRUCK ENGINE Fuel Filter And Base
3406B DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE Fuel Ratio Control For Use With Earlier Engines
3406B DIESEL TRUCK ENGINE Fuel Ratio Control For Use With Later Engines
3406B DIESEL TRUCK ENGINE Automatic Timing Advance 7FB1-Up, 4MG1-4MG3599
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3406B DIESEL TRUCK ENGINE Governor
3406B DIESEL TRUCK ENGINE Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE Turbocharger (TV72 & TV78)