D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES Caterpillar


Balancer Shaft Bearing

Usage:

Remove Balancer Shaft Bearings (D330C & 3304 Marine & Industrial Engines)

start by:

a) remove oil pan plate

b) remove balancer shafts

c) remove flywheel housing

1. Remove the balancer shaft bearings starting with the front bearing with tool group (A).

Install Balancer Shaft Bearings (D330C & 3304 Marine & Industrial Engines)

1. Install the balancer shaft bearings in the cylinder block starting with the front bearing with tool group (A). Install all bearings with oil hole in the cylinder block.

2. During installation, the front and rear bearings are to be .03 ± .02 in. (0.76 ± 0.5 mm) from their respective ends of the cylinder block.

end by:

a) install balancer shafts

b) install flywheel housing

c) install oil pan plate

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.