3208 TRUCK ENGINE Caterpillar


Crankcase Breather

Usage:

Remove And Install Crankcase Breather

1. Loosen clamps (2) on tube and slide hose on to tube. Remove bolt (1) from crankcase breather. Remove crankcase breather (3). Remove O-ring seal from crankcase breather.

2. Install a new O-ring seal on the crankcase breather.

3. Install the crankcase breather on the valve cover with bolt (1). Tighten the bolt to a torque of 10 ± 2 lb. ft. (14 ± 3 N·m).

4. Slide the hose on to the crankcase breather (3) and tighten clamps (2).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.