Mounting Group For AT540, MT643, And MT653 Allison Transmission
Usage:
(1) Maximum face runout of flexplate measured at bolt circle diameter ... .030 in.(0.76 mm)
(2) Bore runout of spacer T.I.R.
(Total indicator reading)
AT540 ... .020 in.(0.51 mm)
MT643, MT653 ... .008 in.(0.20 mm)
(3) Face runout of spacer T.I.R.
(Total indicator reading)
AT540 ... .020 in.(0.51 mm)
MT643, MT653 ... .008 in.(0.20 mm)
(4) Torque for bolts that hold flywheel and adapter to crankshaft ... 55 ± 5 lb.ft.(75 ± 7 N·m)
(5) Bore runout of adapter T.I.R.
(Total indicator reading)
AT540 ... .010 in.(0.25 mm)
MT643, MT653 ... .005 in.(0.13 mm)
(6) Face runout of adapter with flexplate installed [measured 3.00 in. (76.2 mm) from center of bore] (Total indicator reading) ... .003 in.(0.08 mm)
Caterpillar Information System:
3208 TRUCK ENGINE Flywheel
3208 TRUCK ENGINE Fan Mounting Pulley Assemblies
3208 TRUCK ENGINE Pulley And Damper
3208 TRUCK ENGINE Crankshaft
3208 TRUCK ENGINE Bearings For Connecting Rods And Mains
3208 TRUCK ENGINE Pistons And Rings
3208 TRUCK ENGINE Connecting Rod
3208 TRUCK ENGINE Cylinder Block
3208 TRUCK ENGINE V-Belt Tension Chart
3208 TRUCK ENGINE Water Temperature Regulator (9N5121)
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Oil Level Gauge
3208 TRUCK ENGINE Flywheel Runout
3208 TRUCK ENGINE Flywheel Housing Runout
3208 TRUCK ENGINE Flywheel Housing Bore
3208 TRUCK ENGINE Alternators
3208 TRUCK ENGINE Electric Starter Motors
3208 TRUCK ENGINE Starter Solenoids
3208 TRUCK ENGINE Shutoff Solenoid
3208 TRUCK ENGINE Air Compressor
3208 TRUCK ENGINE System Operation
3208 TRUCK ENGINE Testing And Adjusting
3208 TRUCK ENGINE Introduction To The Troubleshooting Guide
3208 TRUCK ENGINE Primary Engine Test For Low Power