Fan Mounting Pulley Assemblies
Usage:
3N1929 Pulley Assembly
*See 3208 DIESEL TRUCK ENGINE TESTING & ADJUSTING for end play adjustment procedure.
(1) End play of pulley ... .001 to .009 in.(0.03 to 0.23 mm)
(2) Dimension from mounting face of bracket to the rear face of pulley ... 2.09 in.(53.1 mm)
(3) Maximum radial play of pulley ... .005 in.(0.13 mm)
6N7690 Pulley Assembly (with hexagon nut and pinned shaft).
(1) Torque for screws ... 40 ± 7 lb.in.(4.5 ± 0.8 N·m)
NOTE: The head of screws (1) must be below outer surface (5) of cover (4).
(2) Torque for nut ... 110 ± 15 lb.ft.(149 ± 20 N·m)
(3) *End play for the pulley ... .001 to .010 in.(0.03 to 0.25 mm)
NOTE: Put 2S3230 Bearing Lubricant in areas (A) until they are one-third to one-half full of lubricant.
*See 3208 DIESEL TRUCK ENGINE TESTING & ADJUSTING for end play adjustment procedure.
Caterpillar Information System:
3208 TRUCK ENGINE Pulley And Damper
3208 TRUCK ENGINE Crankshaft
3208 TRUCK ENGINE Bearings For Connecting Rods And Mains
3208 TRUCK ENGINE Pistons And Rings
3208 TRUCK ENGINE Connecting Rod
3208 TRUCK ENGINE Cylinder Block
3208 TRUCK ENGINE V-Belt Tension Chart
3208 TRUCK ENGINE Water Temperature Regulator (9N5121)
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Oil Level Gauge
3208 TRUCK ENGINE Oil Pump (With belleville washer bypass valve)
3208 TRUCK ENGINE Oil Pump (With plunger bypass valve)
3208 TRUCK ENGINE Flywheel
3208 TRUCK ENGINE Mounting Group For AT540, MT643, And MT653 Allison Transmission
3208 TRUCK ENGINE Flywheel Runout
3208 TRUCK ENGINE Flywheel Housing Runout
3208 TRUCK ENGINE Flywheel Housing Bore
3208 TRUCK ENGINE Alternators
3208 TRUCK ENGINE Electric Starter Motors
3208 TRUCK ENGINE Starter Solenoids
3208 TRUCK ENGINE Shutoff Solenoid
3208 TRUCK ENGINE Air Compressor
3208 TRUCK ENGINE System Operation
3208 TRUCK ENGINE Testing And Adjusting