Pulley And Damper
Usage:
Install the damper assembly on the crankshaft until the hub of the damper assembly comes in contact with the gear on the crankshaft. DO NOT use the bolt and washer that holds the damper assembly on the crankshaft to install the damper assembly.
(1) Torque for bolt that holds the pulley ... 460 ± 60 lb.ft.(624 ± 80 N·m)
When a front power take off is used, increase torque for bolt to ... 700 ± 37 lb.ft.(950 ± 50 N·m)
(2) Distance from end of damper assembly to edge of dust shield: Earlier ... 1.25 ± .06(31.8 ± 1.5 mm)
Later ... 1.359 ± .059 in.(34.53 ± 1.50 mm)
(3) When front power take off is used, tighten bolts to ... 40 ± 5 lb.ft.(55 ± 7 N·m)
Caterpillar Information System:
3208 TRUCK ENGINE Crankshaft
3208 TRUCK ENGINE Bearings For Connecting Rods And Mains
3208 TRUCK ENGINE Pistons And Rings
3208 TRUCK ENGINE Connecting Rod
3208 TRUCK ENGINE Cylinder Block
3208 TRUCK ENGINE V-Belt Tension Chart
3208 TRUCK ENGINE Water Temperature Regulator (9N5121)
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Oil Level Gauge
3208 TRUCK ENGINE Oil Pump (With belleville washer bypass valve)
3208 TRUCK ENGINE Oil Pump (With plunger bypass valve)
3208 TRUCK ENGINE Oil Pan
3208 TRUCK ENGINE Fan Mounting Pulley Assemblies
3208 TRUCK ENGINE Flywheel
3208 TRUCK ENGINE Mounting Group For AT540, MT643, And MT653 Allison Transmission
3208 TRUCK ENGINE Flywheel Runout
3208 TRUCK ENGINE Flywheel Housing Runout
3208 TRUCK ENGINE Flywheel Housing Bore
3208 TRUCK ENGINE Alternators
3208 TRUCK ENGINE Electric Starter Motors
3208 TRUCK ENGINE Starter Solenoids
3208 TRUCK ENGINE Shutoff Solenoid
3208 TRUCK ENGINE Air Compressor
3208 TRUCK ENGINE System Operation