BrakeSaver
Usage:
(1) Before installation, heat carriers to a maximum temperature of ... 300° F(149° C).
Do not heat with a torch.
(2) Before installation, heat wear sleeves to a maximum temperature of ... 300° F(149° C)
Do not heat with a torch.
(3) Torque for bolts ... 40 ± 5 lb. ft.(55 ± 7 N·m)
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Flywheel Runout
3406 DIESEL TRUCK ENGINE Flywheels
3406 DIESEL TRUCK ENGINE Flywheel Housing Runout
3406 DIESEL TRUCK ENGINE Flywheel Housing Bore
3406 DIESEL TRUCK ENGINE Flywheel Housings
3406 DIESEL TRUCK ENGINE Pistons And Rings
3406 DIESEL TRUCK ENGINE Connecting Rod
3406 DIESEL TRUCK ENGINE Connecting Rod And Main Bearing Journals
3406 DIESEL TRUCK ENGINE Crankshaft
3406 DIESEL TRUCK ENGINE Cylinder Liner Projection
3406 DIESEL TRUCK ENGINE Cylinder Liner
3406 DIESEL TRUCK ENGINE Cylinder Block
3406 DIESEL TRUCK ENGINE Brakesaver Control Valve (9N29)
3406 DIESEL TRUCK ENGINE Timing Gear Housing
3406 DIESEL TRUCK ENGINE Tachometer Drive
3406 DIESEL TRUCK ENGINE Air Compressor Drive
3406 DIESEL TRUCK ENGINE Connections For Glow Plug Wiring
3406 DIESEL TRUCK ENGINE Starter Motors (Delco-Remy)
3406 DIESEL TRUCK ENGINE Starter Solenoids
3406 DIESEL TRUCK ENGINE Shut-Off Solenoids (12V)
3406 DIESEL TRUCK ENGINE Alternator
3406 DIESEL TRUCK ENGINE Systems Operation
3406 DIESEL TRUCK ENGINE Testing And Adjusting
3406 DIESEL TRUCK ENGINE Introduction To The Troubleshooting Guide