Water Pump
Usage:
(1) Oil seal. Put engine oil on the seal lip. Assemble with the lip toward the bearings.
(2) Water seal and ring:
a. Put water on the seal.
b. Install the seal and ring together in the housing bore, with the shiny face of th ring outside.
(3) Seal assembly:
a. Remove the spring from the seal.
b. Put water inside the seal assembly.
c. Install the seal assembly around the shaft until the carbon face makes contact with the shiny face of the ring (2).
d. Install the spring.
(4) Torque for bolt holding the impeller ... 28 ± 2 lb. ft.(39 ± 3 N·m)
(5) Clearance between the impeller and the housing ... .022 to .059 in.(0.56 to 1.50 mm)
(6) Torque for bolt that holds the gear:
2P3205 3/8-16 NC Bolt ... 42 ± 5 lb. ft.(58 ± 7 N·m)
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE V-Belt Tension Chart
3406 DIESEL TRUCK ENGINE Water Temperature Regulator
3406 DIESEL TRUCK ENGINE Oil Cooler Bypass Valve
3406 DIESEL TRUCK ENGINE Oil Pan
3406 DIESEL TRUCK ENGINE Oil Filter
3406 DIESEL TRUCK ENGINE 4N735 Oil Pump (Engines With BrakeSaver) (Two Section)
3406 DIESEL TRUCK ENGINE 4N8735 Oil Pump (Engines With BrakeSaver) (Two Section)
3406 DIESEL TRUCK ENGINE Oil Pump (Engines Without BrakeSaver)
3406 DIESEL TRUCK ENGINE Exhaust Elbow
3406 DIESEL TRUCK ENGINE Breather Cap
3406 DIESEL TRUCK ENGINE Air Lines
3406 DIESEL TRUCK ENGINE Turbocharger
3406 DIESEL TRUCK ENGINE Cylinder Block
3406 DIESEL TRUCK ENGINE Cylinder Liner
3406 DIESEL TRUCK ENGINE Cylinder Liner Projection
3406 DIESEL TRUCK ENGINE Crankshaft
3406 DIESEL TRUCK ENGINE Connecting Rod And Main Bearing Journals
3406 DIESEL TRUCK ENGINE Connecting Rod
3406 DIESEL TRUCK ENGINE Pistons And Rings
3406 DIESEL TRUCK ENGINE Flywheel Housings
3406 DIESEL TRUCK ENGINE Flywheel Housing Bore
3406 DIESEL TRUCK ENGINE Flywheel Housing Runout
3406 DIESEL TRUCK ENGINE Flywheels
3406 DIESEL TRUCK ENGINE Flywheel Runout