Water Pump
Usage:
(1) Oil seal. Put engine oil on the seal lip. Assemble with the lip toward the bearings.
(2) Water seal and ring:
a. Put water on the seal.
b. Install the seal and ring together in the housing bore with the shiny face of the ring outside.
(3) Seal assembly:
a. Remove the spring from the seal.
b. Put water inside the seal assembly
c. Install the seal assembly around the shaft until the carbon face makes contact with the shiny face of the ring (2).
d. Install the spring.
(4) Torque for bolt that holds the impeller ... 28 ± 2 lb. ft.(39 ± 3 N·m)
(5) Clearance between the impeller and the housing ... .022 to .059 in(0.56 to 1.50 mm)
(6) Torque for bolt that holds the gear:
2P3205 3/8-16 NC Bolt ... 42 ± 5 lb. ft.(58 ± 7 N·m)
Caterpillar Information System:
3406 INDUSTRIAL & MARINE ENGINES Oil Pan
3406 INDUSTRIAL & MARINE ENGINES Oil Cooler Bypass Valve
3406 INDUSTRIAL & MARINE ENGINES Oil Filter (Marine)
3406 INDUSTRIAL & MARINE ENGINES Oil Filter (Industrial)
3406 INDUSTRIAL & MARINE ENGINES Oil Pump
3406 INDUSTRIAL & MARINE ENGINES Air Cleaner
3406 INDUSTRIAL & MARINE ENGINES Breather Cap
3406 INDUSTRIAL & MARINE ENGINES Exhaust Manifold
3406 INDUSTRIAL & MARINE ENGINES Turbochargers (Schwitzer 4MFW 711, 4MFW 731)
3406 INDUSTRIAL & MARINE ENGINES Turbocharger (Schwitzer F552)
3406 INDUSTRIAL & MARINE ENGINES Cylinder Head
3406 INDUSTRIAL & MARINE ENGINES Idler Gear Assembly
3406 INDUSTRIAL & MARINE ENGINES Aftercooler
3406 INDUSTRIAL & MARINE ENGINES Radiator
3406 INDUSTRIAL & MARINE ENGINES Fan Drive
3406 INDUSTRIAL & MARINE ENGINES Belt Tightener
3406 INDUSTRIAL & MARINE ENGINES V-Belt Tension Chart
3406 INDUSTRIAL & MARINE ENGINES Water Temperature Regulator
3406 INDUSTRIAL & MARINE ENGINES Air Compressor Drive
3406 INDUSTRIAL & MARINE ENGINES Cylinder Block
3406 INDUSTRIAL & MARINE ENGINES Cylinder Liner
3406 INDUSTRIAL & MARINE ENGINES Cylinder Liner Projection
3406 INDUSTRIAL & MARINE ENGINES Pistons And Rings
3406 INDUSTRIAL & MARINE ENGINES Connecting Rod