Usage:
start by:
a) remove oil manifold
1. Remove cover (1) from upper housing.
2. Remove three pipe plugs (2).
3. Remove oil gauge and tube (3).
4. Remove housing bolts (4).
5. Remove six bolts (5) from inside the upper housing. Get to these bolts through the top cover opening and the three pipe plug holes.
6. Install four 3/8"-16NC forcing screws and separate the upper and lower housings.
7. Install one 3/8"-16NC forged eyebolt (6) and two 5/8"-11NC forged eyebolts (7) in the upper housing.
8. Fasten hoist and remove upper housing. Weight is 350 lbs. (159 kg).
Install Upper Housing
1. Install two 5/8"-11NC forged eyebolts (1) and one 3/8"-16NC forged eyebolt (2), attach a hoist and install upper housing. Weight is 350 lbs. (158 kg).
NOTE: Use 7M7260 Liquid Gasket Material between housing halfs before installing upper housing.
2. Install housing bolts (3).
3. Install upper housing inner bolts (4).
4. Install pipe plugs (5) in upper housing.
5. Install dip stick housing and top inspection cover.
end by:
a) install oil manifold.
b) install oil pump.