D353 INDUSTRIAL & MARINE ENGINES Caterpillar


Oil Manifold

Usage:

Remove Oil Manifold

start by:

a) remove oil filter.

b) remove pump.

1. Remove manifold bolts (1) and nuts (2).

2. Install two 3/8" forcing screws (3), using a nylon strap and hoist support oil manifold while preparing to remove oil manifold from the case.

3. Remove manifold (4). Weight is 85 lbs. (39 kg).

Install Oil Manifold

1. Install manifold (1) on housing.


NOTICE

Put oil seals and studs in alignment with manifold.


2. Install manifold nuts and bolts.

end by:

a) install pump.

b) install oil filter.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.