Flywheel
Usage:
Remove Flywheel
1. Remove timing hole cover (1) and pointer for timing mark.
2. Remove seven of the bolts (2) that hold flywheel to crankshaft.
3. Fasten a hoist to flywheel with tool (A). Remove the last bolt and remove the flywheel. Weight of flywheel is 290 lb. (132 kg).
Install Flywheel
1. Install a 3/4"-16NF guide bolt (1) 5 in. (12.7 cm) long in bolt hole of crankshaft that has a mark by it.
2. Fasten a hoist to flywheel (2) with tool (A). Install flywheel with bolt hole that has a mark by it in alignment with guide bolt in crankshaft.
3. Install the bolts that hold flywheel to crankshaft.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Front Seal
D353 INDUSTRIAL & MARINE ENGINES Front Cover
D353 INDUSTRIAL & MARINE ENGINES Vibration Damper And Pulley
D353 INDUSTRIAL & MARINE ENGINES Cylinder Liners (Later)
D353 INDUSTRIAL & MARINE ENGINES Cylinders Liners (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Pistons
D353 INDUSTRIAL & MARINE ENGINES Pistons (Later)
D353 INDUSTRIAL & MARINE ENGINES Pistons (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Camshaft Bearings
D353 INDUSTRIAL & MARINE ENGINES Camshaft
D353 INDUSTRIAL & MARINE ENGINES Water Directors
D353 INDUSTRIAL & MARINE ENGINES Valve Guides
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal
D353 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D353 INDUSTRIAL & MARINE ENGINES Timing Gears
D353 INDUSTRIAL & MARINE ENGINES Timing Gear Housing
D353 INDUSTRIAL & MARINE ENGINES Crankshaft
D353 INDUSTRIAL & MARINE ENGINES 7231 Marine Transmission Systems Operation
D353 INDUSTRIAL & MARINE ENGINES 7231 Marine Transmission Testing And Adjusting
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Magnetic Strainer And Oil Filter
D353 INDUSTRIAL & MARINE ENGINES Selector Valve
D353 INDUSTRIAL & MARINE ENGINES Oil Cooler
D353 INDUSTRIAL & MARINE ENGINES Oil Manifold