3408 & 3408B DIESEL TRUCK ENGINE Caterpillar


Fuel Filter Base

Usage:

Remove Fuel Filter Base

start by:

a) remove fuel priming pump

1. Remove the fuel filter from the fuel filter base with tool (A).

2. Disconnect the fuel inlet line and fuel outlet line from the fuel filter base.

3. Remove two bolts and nuts (2). Remove fuel filter base (1).

Install Fuel Filter Base

1. Put fuel filter base (1) in position on the bracket assembly. Install the two bolts and nuts that hold it.

2. Connect the fuel inlet line and fuel outlet line to the base.

3. Install a new fuel filter. Follow the instructions on the filter for the correct installation procedure.

NOTE: After the fuel priming pump is installed, remove (bleed) the air from the fuel system.

end by:

a) install fuel priming pump

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.