3408 & 3408B DIESEL TRUCK ENGINE Caterpillar

start by:

a) remove air compressor

1. Remove nut (4) from the compressor drive shaft with tool (A). Remove spacer (3).

2. Remove O-ring seal (2) from adapter (1).

3. Remove drive gear (5) from the compressor drive shaft with tool (B). Remove the key from the shaft.

4. Remove the adapter and gasket (6).

Install Accessory Drive

1. Install the key on air compressor drive shaft (1).

2. Install gasket (5) and adapter (6) on the air compressor.

3. Put the groove in the drive gear in alignment with the key in the drive shaft. Install gear (2) on the shaft.

4. Install spacer (3) and nut (4) on the drive shaft. Tighten the nut with tool (A).

5. Install O-ring seal (7) on the adapter.

end by:

a) install air compressor