PRODUCT SUPPORT PROGRAM FOR REPLACING TEMPERATURE CONTROL CABLES ON CERTAIN 953C, 963C AND 973C TRACK TYPE LOADERS
Usage:
SEBE7859
December 11, 2001
U-340
A-238
AU-230
S-180
H-137
O-261
Show/hide table
| After failure only |
PRODUCT SUPPORT PROGRAM FOR REPLACING TEMPERATURE CONTROL CABLES ON CERTAIN 953C, 963C AND 973C TRACK TYPE LOADERS |
|
| 7337 |
PS50302
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
December 31, 2003PROBLEM
Temperature control cables need to be replaced on certain 953C, 963C and 973C Track Type Loaders. Temperature control cables may become sticky due to contamination and have resulted in failure of the internal mechanism.AFFECTED PRODUCT
953C 2ZN1-3769Delta 05A11573, 11806, 11807, 12047, 12048, 12088, 12089, 12096, 12097
963C 2DS1-1281
973C 3RZ1-289
PARTS NEEDED
1 - 8C5224 Plug - Sealing1 - 8M2771 Clip
6 - 3S2093 Strap
2 - 8T0288 Bolt
2 - 8T0328 Washer - Hard
1 - 8T4171 Bolt
4 - 9X2045 Screw - Truss
1 - 9X8256 Washer
2 - 117960 Grommet
1 - 1536271 Cable Assembly
1 - 1689895 Plate Assembly
1 - 1689896 Seal
1 - 1913379 Ring
1 - 2085361 Plate Assembly
ACTION REQUIRED
Update the cable and routing. Refer to special instruction REHS1148.SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SYNCHRONIZATION LINES ON CERTAIN 973C TRACK TYPE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SYNCHRONIZATION LINES ON CERTAIN 973C TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW HIGH CAPACITY OIL COOLER ON CERTAIN 924G AND 924GZ WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW HIGH CAPACITY OIL COOLER ON CERTAIN 924G AND 924GZ WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR LINKAGE PIN CONVERSION TO GREASE (DAILY LUBRICATION) ON CERTAIN 992G WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR LINKAGE PIN CONVERSION TO GREASE (DAILY LUBRICATION) ON CERTAIN 992G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR DISCOUNTED PURCHASE PRICE ON AUTOLUBE SYSTEM ON CERTAIN 992G WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR DISCOUNTED PURCHASE PRICE ON AUTOLUBE SYSTEM ON CERTAIN 992G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR WELDING THE LOADER FRAME TOWER THAT MAY CRACK ON CERTAIN 953C TRACK TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR WELDING THE LOADER FRAME TOWER THAT MAY CRACK ON CERTAIN 953C TRACK TYPE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE SHUTTLE VALVE ON CERTAIN D11R TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE SHUTTLE VALVE ON CERTAIN D11R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORGED LINK THAT MAY BREAK ON CERTAIN D6M TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FORGED LINK THAT MAY BREAK ON CERTAIN D6M TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 824G, 825G, 826G COMPACTORS AND ON CERTAIN 980G WHEEL LOADERS WITH GREATER THAN 10,000 PART HOURS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE GRAPPLE TONG CYLINDER PIN TO PREVENT PREMATURE FAILURES ON CERTAIN 535B AND 545 WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR UPDATING THE GRAPPLE TONG CYLINDER PIN TO PREVENT PREMATURE FAILURES ON CERTAIN 535B AND 545 WHEEL SKIDDERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE POWERTRAIN CHARGE PRESSURE HOSE FROM THE CHARGE PUMP TO THE RIGHT HAND HYDRAULIC MOTOR ON CERTAIN 953C TRACK TYPE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE POWERTRAIN CHARGE PRESSURE HOSE FROM THE CHARGE PUMP TO THE RIGHT HAND HYDRAULIC MOTOR ON CERTAIN 953C TRACK TYPE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE THROTTLE PEDAL PLATE ON CERTAIN 623G, 627G, 631G, AND 637G WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE THROTTLE PEDAL PLATE ON CERTAIN 623G, 627G, 631G, AND 637G WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE IMPLEMENT PUMP THAT MAY EXPERIENCE CAVITATION AND AERATION FAILURES ON CERTAIN 980G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ELECTRONIC WATER VALVE ON CERTAIN D10R AND D11R TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ELECTRONIC WATER VALVE ON CERTAIN D10R AND D11R TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE POWERTRAIN OIL FILTER ON CERTAIN 834G WHEEL DOZERS, 836G LANDFILL COMPACTORS, AND 988G WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE POWERTRAIN OIL FILTER ON CERTAIN 834G WHEEL DOZERS, 836G LANDFILL COMPACTORS, AND 988G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TILT LEVER ON CERTAIN 950G AND 962G WHEEL LOADERS FOR OUT OF SPECIFICATION WELDS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TILT LEVER ON CERTAIN 950G AND 962G WHEEL LOADERS FOR OUT OF SPECIFICATION WELDS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE GRAPPLE AUTO-GRAB PRESSURE SWITCH TO A PRESSURE SENSOR ON CERTAIN 525B, 535B AND 545 WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR UPDATING THE GRAPPLE AUTO-GRAB PRESSURE SWITCH TO A PRESSURE SENSOR ON CERTAIN 525B, 535B AND 545 WHEEL SKIDDERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE TO CERTAIN 950G, 962G, 966G, 972G, AND 980G SERIES II WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE TO CERTAIN 950G, 962G, 966G, 972G, AND 980G SERIES II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BALANCING STEM IN THE RIDE CONTROL VALVES ON CERTAIN 966G AND 972G WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BALANCING STEM IN THE RIDE CONTROL VALVES ON CERTAIN 966G AND 972G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM REPLACING THE ELBOW THAT MAY BURST IN THE LINES GROUP - AIR ON CERTAIN 966G II AND 972G II WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM REPLACING THE ELBOW THAT MAY BURST IN THE LINES GROUP - AIR ON CERTAIN 966G II AND 972G II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING AN A/C OVERCHARGE PROBLEM ON CERTAIN 966G AND 972G II MACHINES PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING AN A/C OVERCHARGE PROBLEM ON CERTAIN 966G AND 972G II MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE PEDAL VALVE THAT MAY BE NOISY ON CERTAIN 966G AND 972G WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE PEDAL VALVE THAT MAY BE NOISY ON CERTAIN 966G AND 972G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING AN A/C OVERCHARGE PROBLEM ON CERTAIN 980G II MACHINES PRODUCT IMPROVEMENT PROGRAM FOR CORRECTING AN A/C OVERCHARGE PROBLEM ON CERTAIN 980G II MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBES IN THE DUMP CYLINDER LINES GROUP ON CERTAIN D11R CARRYDOZER TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TUBES IN THE DUMP CYLINDER LINES GROUP ON CERTAIN D11R CARRYDOZER TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR CONVERTING TO SPECIAL APPLICATION RIDE CONTROL ON CERTAIN 988G WHEEL LOADERS EQUIPPED WITH LOGGING ARRANGEMENTS PRODUCT IMPROVEMENT PROGRAM FOR CONVERTING TO SPECIAL APPLICATION RIDE CONTROL ON CERTAIN 988G WHEEL LOADERS EQUIPPED WITH LOGGING ARRANGEMENTS