Product Support Program For Replacing The Support Mounting Bolts On The Air Inlet Tube Assembly On Certain 3512B, 3516, And 3516B Generator Sets Caterpillar


Product Support Program For Replacing The Support Mounting Bolts On The Air Inlet Tube Assembly On Certain 3512B, 3516, And 3516B Generator Sets

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4722" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

Termination Date

December 31, 1999

Problem

The Air Inlet Tube As. support mounting bolts on certain 3512B, 3516, and 3516B Generator Set engines need to be replaced. The bolts could fail due to internal fractures.

Affected Product
Model & Identification Number

3512B (6GW123-125, 6GW128-134, 6GW136-141)

3516 (8TW125-131)

3516B (8NW124-130)

Parts Needed

All 3512 engines will need:

8 - 0T0055 BOLT

All 3516 engines will need:

12 - 0T0055 BOLT

Action Required

Replace the existing Air Inlet Tube As. support mounting bolts with the hardware listed in this program. These bolts should be tightened to a torque of 47 Nm.

NOTE: Only 8 bolts are needed for 3512 units, all 3516 units will need the full 12 bolts.

Service Claim Allowances

NOTE: This is a 1-hour job.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

Product Support Program For Replacing The Emsii Module On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Engines Product Support Program For Replacing The Emsii Module On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Engines
New Software Needs To Be Installed On Certain 3508, 3508B, 3512b, 3516, And 3516b Marine Engines New Software Needs To Be Installed On Certain 3508, 3508B, 3512b, 3516, And 3516b Marine Engines
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Product Support Program For Replacing The EIS Transformers On Certain G3512 And G3516 Engines Product Support Program For Replacing The EIS Transformers On Certain G3512 And G3516 Engines
Product Support Program For Replacing The Air And Oil Temperature Sensors On Certain 3508B, 3512B, And 3516B Engines; 3508, 3512, 3516 W/EUI Option Commercial Engines. Product Support Program For Replacing The Air And Oil Temperature Sensors On Certain 3508B, 3512B, And 3516B Engines; 3508, 3512, 3516 W/EUI Option Commercial Engines.
3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock 3E8848 Speed Sensors With Date Codes Prior To 0158 Need To Be Removed From Dealer Parts Stock
Product Support Program For Replacing The Retaining Washer In The Jacobs Brake On Certain 3406E Truck Engines Product Support Program For Replacing The Retaining Washer In The Jacobs Brake On Certain 3406E Truck Engines
Product Support Program For Inspection Of Jacobs Exhaust Brakes On Certain 3126B Truck Engines Product Support Program For Inspection Of Jacobs Exhaust Brakes On Certain 3126B Truck Engines
Product Support Program For Replacing The Unit Injector Body ; Sleeve Seal O-Rings On Certain 3406E Truck Engines Product Support Program For Replacing The Unit Injector Body & Sleeve Seal O-Rings On Certain 3406E Truck Engines
Missing Cable Straps On Certain XQ225 (3306B) Generator Stator Leads Missing Cable Straps On Certain XQ225 (3306B) Generator Stator Leads
All 148-2048 And 126-0065 Head Gaskets Need To Be Removed From Parts Stock All 148-2048 And 126-0065 Head Gaskets Need To Be Removed From Parts Stock
Product Support Program For Replacing The Spherical Roller Bearings On 3516 Generator Sets Product Support Program For Replacing The Spherical Roller Bearings On 3516 Generator Sets
Product Support Program For Flashing New Software On Certain 3126 And 3126B Engines Used With The Allison AT545 Transmission Product Support Program For Flashing New Software On Certain 3126 And 3126B Engines Used With The Allison AT545 Transmission
1060070 Governor Spring Breakage 1060070 Governor Spring Breakage
Product Support Program For Replacing The Water Pump Inlet Hose On Certain 3176C And 3196 Marine Engines Product Support Program For Replacing The Water Pump Inlet Hose On Certain 3176C And 3196 Marine Engines
A New 1613995 Spring Group Needs To Be Installed In The Oil Filter Housing On Certain G3508, G3512, And G3516 Gas Engines A New 1613995 Spring Group Needs To Be Installed In The Oil Filter Housing On Certain G3508, G3512, And G3516 Gas Engines
The Isolation Mount Bolts Need To Be Replaced On Certain 3412C Generator Set Engines The Isolation Mount Bolts Need To Be Replaced On Certain 3412C Generator Set Engines
Engine Emission Labels And An Owner Notification Letter Will Be Provided To Owners Of Certain 3304B Generator Sets Engine Emission Labels And An Owner Notification Letter Will Be Provided To Owners Of Certain 3304B Generator Sets
100-2825, 137-4729, 0R8575, 0R3650, And 6I2917 Injector Groups Need To Be Inspected 100-2825, 137-4729, 0R8575, 0R3650, And 6I2917 Injector Groups Need To Be Inspected
Service Letter Cancellation Service Letter Cancellation
Certain Remanufactured Cylinder Packs, Short Blocks, Long Blocks, And Engines Need To Be Removed From Dealer Parts Stock Certain Remanufactured Cylinder Packs, Short Blocks, Long Blocks, And Engines Need To Be Removed From Dealer Parts Stock
Product Support Program For Flashing New Software On C-10 Engines Product Support Program For Flashing New Software On C-10 Engines
0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock 0R0824, 0R2089, 0R2128, 0R2170, 0R2586, And 0R2666 Remanufactured Cylinder Heads For D343 Engines May Need To Be Removed From Dealer Parts Stock
The Radiator Fan Support Beam Needs To Be Replaced On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Generator Sets The Radiator Fan Support Beam Needs To Be Replaced On Certain 3508, 3508B, 3512, 3512B, 3516, And 3516B Generator Sets
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.