Usage:
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI1342" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI1342" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
NOTE: This program must be done in conjunction with PI1329 dated April 25, 1997 whenever possible.
Problem
The 1114203 Stiffener Plate may have been omitted from the rops cab on certain 12H, 120H, and 140H Motor Graders that were manufactured in Australia. A new stiffer plate will be is available for reinforcing the ROPS.
Affected Product
Model & Identification Number
12H (2WR420-530)
120H (2AN39-70)
140H (9ZN58-129)
Parts Needed
- 1* - 5MT6479 Locating Template
- 2* - Plate (Substitute Plate for 1114203)
*These items will be supplied to dealers by CofA Service Engineering. Contact Glen Crawford (03-9339-9242) if you have not received the correct quantities these parts for the product in your territory.
Action Required
New stiffener plates are to be welded in locations shown on Illustrations in Figure 1 and Figure 2. using the 5MT6479 Template provided. See the attached rework procedure.
Owner Notification
Australian owners will receive the attached Owner Notification.
Service Claim Allowances
NOTE: This is a 2-hour job. CofA will supply all parts.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.
- (1-Owner Notification)
- (2-Rework Procedure/Welding Instructions)
Copy Of Owner Notification
Rework Procedure
Figure 1
Figure 2
Figure 3