Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory Caterpillar


Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Termination Date

December 31, 1994

Problem

The new 3400 Liner O-Ring Seals have updated material. The 3E6777 Seal is replaced by 1102220 Seal and the 5P8057 Kit is replaced by 1183732 Kit.

Action Required

Remove all 3E6777 Seals and 5P8057 Kits from dealer inventory. Check all Remanufactured Cylinder Packs, listed in the table below, with date codes before July 1994. Replace all 5P8057 Kits with a new 1183732 Kit.

Next Level for 1183732 Kit
0R1570 Cylinder Pack
0R1571 Cylinder Pack
0R1572 Cylinder Pack
0R2413 Cylinder Pack
0R2693 Cylinder Pack
0R2694 Cylinder Pack
0R2861 Cylinder Pack
0R2862 Cylinder Pack
0R2974 Cylinder Pack
0R2975 Cylinder Pack
0R3518 Cylinder Pack
0R3519 Cylinder Pack
0R3585 Cylinder Pack
0R3757 Cylinder Pack
0R3782 Cylinder Pack
0R3783 Cylinder Pack
0R3788 Cylinder Pack
0R4176 Cylinder Pack
0R4178 Cylinder Pack

Service Claim Allowances

Submit one claim for all 3E6777 Seals and 5P8057 Kits removed from Parts Stock.

Parts Disposition

U.S. and Canadian Dealers

Return all 3E6777 Seals and 5P8057 Kits that are removed from Parts Stock and a copy of the claim to:

Caterpillar Inc.
Attn: Supplier Recovery Supervisor
Warehouse #4 Docks 7 through 10
8201 N. University
Peoria, IL 61615

CofA

Return all 3E6777 Seals and 5P8057 Kits that are removed from Parts Stock and a copy of the claim to:

Caterpillar of Australia
Warranty Claims Area
1 Sharps Rd.
Tullamarine Vic 3043

COSA Dealers

Contact: Claim Section Supervisor Grimbergen Parts Depot

All Other Dealers

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

Product Support Program For Installing Flexible Conduit On The Wiring Harness On Certain 3408 And 3412 Marine Engines Product Support Program For Installing Flexible Conduit On The Wiring Harness On Certain 3408 And 3412 Marine Engines
Replace The Piston Oil Cooling Tubes On Certain 3408B And 3408C Marine Engines Replace The Piston Oil Cooling Tubes On Certain 3408B And 3408C Marine Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Product Support Program For Replacing The Personality Module Installed On Certain 3408 Marine High Performance Engines Product Support Program For Replacing The Personality Module Installed On Certain 3408 Marine High Performance Engines
Product Support Program For Replacing The Fuel Injector Nozzles On Certain 3406C Engines Rated At 415 Or 425 Horsepower Product Support Program For Replacing The Fuel Injector Nozzles On Certain 3406C Engines Rated At 415 Or 425 Horsepower
The Exhaust Valve Springs Need To Be Replaced On Certain 3116 Truck Engines And 938F And 960 Loaders The Exhaust Valve Springs Need To Be Replaced On Certain 3116 Truck Engines And 938F And 960 Loaders
Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan Product Support Program For Installing And Calibrating A New Oil Level Gage On Certain 3406B PEEC And 3406C Electronic Engines Equipped With A Front-Sump Oil Pan
Service Letter Cancellation Service Letter Cancellation
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Certain Fuel Injectors Need To Be Removed From Part Stock Certain Fuel Injectors Need To Be Removed From Part Stock
Product Support Program For Installing A New Turbocharger And Fuel Injector Nozzles On Certain 435 Hp 3208 TA Marine Engines Product Support Program For Installing A New Turbocharger And Fuel Injector Nozzles On Certain 435 Hp 3208 TA Marine Engines
A Plug May Need To Be Replaced In The Auxiliary Sea Water Pump On Certain 3408 And 3412 Marine Engines A Plug May Need To Be Replaced In The Auxiliary Sea Water Pump On Certain 3408 And 3412 Marine Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Product Support Program For Reworking Certain 3406C Truck Engines With Low Power Complaints Product Support Program For Reworking Certain 3406C Truck Engines With Low Power Complaints
Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock Certain Remanufactured Crankshafts For Use In 3412 Engines Need To Be Removed From Parts Stock
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines Product Support Program For Reworking The Ignition Wires On Certain G3306, G3408 And G3412 Engines
Remove All 1105146 Damper Assemblies From Parts Stock Remove All 1105146 Damper Assemblies From Parts Stock
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications Product Support Program For Replacing The Front Gear Train On Certain 3208 Industrial Engines Used Primarily In Fertilizer Spreader Applications
A New Damper Assembly, Adaptor Ring And Front Idler Gear Bearing Need To Be Installed On Certain G3516 Engines A New Damper Assembly, Adaptor Ring And Front Idler Gear Bearing Need To Be Installed On Certain G3516 Engines
Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines Product Support Program For Low Power Complaints Resulting From A Fuel Rate Loss In The Electronic Unit Injectors Of Certain 3406E Truck Engines
The Oil Pressure Relief Valve Needs To Be Inspected On Certain 416B, 426B, 428B And 438B Backhoe Loaders, 307 And 312 Excavators, And 3054 Industrial And Generator Set Engines The Oil Pressure Relief Valve Needs To Be Inspected On Certain 416B, 426B, 428B And 438B Backhoe Loaders, 307 And 312 Excavators, And 3054 Industrial And Generator Set Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.