New Adapter Group For Use With Fuel Injection Test Bench
Usage:
D342, D353, D346, D379, D398, D399 Engines Shipped with Safety Shut-Off Controls
A new 5P7387 Adapter Group is available for use on the fuel injection test bench. This adapter group will permit you to install the safety shut-off controls on the fuel injection test bench to check for correct operation.
This adapter group has a mounting plate, oil supply fitting and two drive adapters. (See Illustration 1.)
Illustration 1. Components of 5P7387 Adapter Group.
Illustration 2. Typical application of 5P7387 Adapter Group.
Caterpillar Information System:
1977/06/22 Water Pump Has Stronger Pulley
1977/06/08 Improvements To Fuel Injection Pump And Governor
1977/05/25 Parts In 1P3075 Seal Puller Group Available Separately
1977/05/25 Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25 Orifice In Oil Supply Passages Of BrakeSaver Stator Prevent Seal Leakage
1977/05/25 Self Locking Bolts Or Hardened Washers Used In Place Of Sheet Metal Locks
1977/05/25 Flare Nut Wrenches Available
1977/05/25 Shorter Bolts Now Used In Exhaust Manifold Support
1977/05/25 New Rotor Assembly For Engine Oil Pump Has A Drilled Passage For Better Lubrication Of Oil Pump Bearing
1977/05/13 New Fuel Nozzle Assembly Available
1977/05/13 Gasket For Water Temperature Regulator Now Has Larger Vent Passage
1977/05/13 Improved Keystone Piston Assembly
1977/06/22 List Of Service Publications
1977/06/22 Fabricated Tools For Assembly And Disassembly Of 7271 Marine Transmission
1977/06/22 New Gasket Used At The Outlet Flange On Heavy-Duty Air Cleaner Group
1977/06/22 Stronger Guide Assembly For Oil Level Gauge Used On Caterpillar-Built Engines In Massey-Ferguson Tractors
1977/06/29 5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29 New Aftercooler Housings And Covers Have Improved Design
1977/06/29 Service Tools For Low Emission Truck Engines With EGR
1977/06/29 Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures
1977/06/29 List Of Service Publications
1977/06/29 New Procedure For Calibration Of 1P3060 Pyrometer Group
1977/06/29 Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger
1977/06/29 Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons