1999/10/01 Caterpillar


New Water Pump Group (Basic) Includes Many Improvements {1361}

Usage:


3304 (2KK0026-Up),
3304B (83Z1133-Up, 9HK0537-Up),
3306 (85Z14544-Up),
3306B (2AJ1199-Up, 8JJ0564-Up, 1CZ1510-Up, 9NR3503-Up) Generator Set Engines;
G3304 (37Y3739-Up),
G3306 (07Y7163-Up) Industrial Gas Engines;
3304 (02B18170-Up, 04B27312-Up, 10E5518-Up),
3306 (23C2864-Up, 66D50844-Up),
3306B (1BM0534-Up, 5GZ0315-Up, 7JB11710-Up, 64Z28729-Up) Industrial Engines;
3304B (1NS0549-Up, 1PS0647-Up, 13E1420-Up),
3306 (84Z3236-Up),
3306B (1RS0638-Up, 9SL0543-Up, 84Z3236-Up) Marine Engines

Description of Change: New water pump groups with many improvements are used on 3304 and 3306 Machine Engines. These improvements include:

* Cast iron low inertia impeller
* Corrosion resistant stainless steel shaft
* Straight press fit between impeller and shaft helps prevent loosening.
* Corrosion resistant stainless steel shaft
* Single piece water seal for improved fluid sealing
* Dual lip oil seal for improved fluid sealing
* Redesigned inlet pump housing provides reduced inlet restriction
* Redesigned inlet pump housing included a reservoir in conjunction with a weep hole to handle any coolant drips that get past the water seal
* Improved gasket between pump housing and cover

Adaptable To: The new and former water pump groups (basic) are identified in the chart. The new water pump groups (basic) are in effect as shown in the subtitle. The new water pump groups (basic) are a direct replacement for the former water pump groups (basic) which have been canceled.

The parts books that need to be updated are:

* 3304B Gen Set Engine (83Z), SEBP2196
* 3304B Gen Set Engine (9HK), SEBP2108 3306 Gen Set Eng (85Z), SEBP2007
* 3306B Gen Set Eng (2AJ), SEBP1805
* 3306B Gen Set Eng (8JJ), SEBP2031
* 3306B Gen Set Eng (1CZ), SEBP2751
* 3306B Gen Set Eng (9NR), SEBP2532
* G3304 Ind Gas Eng (37Y), SEBP1257
* G3306 Ind Gas Eng (07Y), SEBP2412
* 3304 Ind Eng (02B), SEBP2156
* 3304 Ind Eng (04B), SEBP2306
* 3304 Ind Eng (10E), SEBP1400
* 3306 Ind Eng (23C), SEBP2809
* 3306 Ind Eng (66D), SEBP1967
* 3306B Ind Eng (7JB, 64Z), SEBP1451
* 3306B Ind Eng (1BM, 5GZ), SEBP2799
* 3304B Marine Aux & Gen Set Eng (1NS), SEBP2516
* 3304B Marine Aux & Gen Set Eng (1PS), SEBP2521
* 3304B Marine Eng (13E), SEBP1405
* 3306 Marine Eng (84Z), SEBP1407
* 3306B Marine Aux & Gen Set (1RS), SEBP2519
* 3306B Marine Eng (9SL, 84Z), SEBP1407

Caterpillar Information System:

1999/09/01 Procedure For Replacing The 124-4596 Exhaust Port Thermocouple And 124-4598 Turbocharger Inlet And Exhaust Thermocouple In The Mounting And Electrical Sensor Groups{7498}
1999/09/01 New Seal Kits Available For Servicing Heat Exchangers{1379}
1999/09/01 New Water Temperature Regulators Used In Temperature Regulator Groups{1355}
1999/09/01 New Connecting Rod Bolt Tightening Procedure{1218}
1999/09/01 New Rod Ends With Increased Temperature Rating Used In Exhaust Bypass Groups{1057}
1999/09/01 Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01 Summary Of Improvements To Deep Sump Oil Pans{1302}
1999/09/01 Service Repair Kits Available For Deltec® Gas Pressure Regulators{1270}
1999/09/01 Improved Woodward EG3P Actuator Assembly Is Available{1264,1265,1716}
1999/09/01 Front Gear Group Changed To Help Keep Oil Pump Adapter Assembly Bolts Tight{1206,1304}
1999/09/01 New Rear Gear Group Available For Use In Landfill Applications{1206}
1999/09/01 Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/10/01 Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/10/01 Revised Maintenance Schedules For 3500 Diesel Commercial Engines {0374,1000}
1999/10/01 Corrections For Operation & Maintenance Manual, SEBU6966-02, "3600 Heavy Fuel Engines" {0374}
1999/10/01 New Method To Determine When To Clean The Aftercooler Core {1064}
1999/10/01 New Lever In Governor Group Provides Improved Control {1265}
1999/10/01 New Bearings In Fuel Injection Control Housing Provide Improved Service Life {1298}
1999/10/01 Hardened Rod End Bearings Provide Improved Reliability {1298}
1999/10/01 Identification Of Compatible Engine Oil Differential Pressure Sensors {1924}
1999/11/01 138-8440 Component Cleaner May Damage Electrical Connectors {0644}
1999/11/01 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901,1920}
1999/11/01 Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01 New Optional Two Piece Service Replacement Piston {1214,1331}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.