1999/02/01 Caterpillar


161-3995 Oil Filter Spring Group Available To Increase Oil Filter Element Seating Force{1306}

Usage:


All 3500 And 3500B Diesel Commercial Engines Equipped With A 1W-2963 Oil Filter Housing Assembly And A 2W-9299 Oil Filter Housing Cover

The 161-3995 Oil Filter Spring Group is available to increase the seating force on the oil filter elements. This increased force will help prevent the filter elements from being unseated. An unseated filter element may allow unfiltered oil to bypass the filter element.

Cold starts with engines using a straight weight lube oil could create a lube oil pressure spike that could unseat the lube oil filter elements. Dimensional tolerances of competitive oil filters or non genuine parts could also result in improper retention of the oil filter elements.

The 161-3995 Oil Filter Spring Group includes a spring, retainer, stopper assembly, and installation instructions. This spring group can be added to any 3500 And 3500B Diesel Commercial Engine equipped with a 1W-2963 Oil Filter Housing Assembly and a 2W-9299 Oil Filter Housing Cover. This spring group can easily be installed during a normal oil filter element change.

Caterpillar Information System:

1999/02/01 Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fume Recirculation{1063}
1999/02/01 New Turbocharger Exhaust Coupling Used In Turbocharger Groups{1052,1061,1065}
1999/02/01 New Piston And Rod Groups Used{1214,1215}
1999/02/01 Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}
1999/02/01 Improved Cylinder Head Groups For G3400 Engines{1100,1101}
1999/01/01 Use 144-0235 Belt Tension Gauge To Check Belt Tension{7461,1357}
1999/01/01 Use 145-9342 Filter Crusher to Reduce Waste And Collect Oil{5720}
1999/01/01 Use 9U-5968 Hydrostatic Filter Group To Filter Contaminanted Oil{5050,3200,3218}
1999/01/01 Use 153-9630 PWM-Analog Test Group-Sensor Adapter Kit For DataView{1000,3000,4000,5000,6000}
1999/01/01 Use 131-5050 DataView Group and 131-5051 DataView Portable TechStation Group For Accurate Diagnostics{1000,3000,4000,5000,6000,0788}
1999/01/01 Use 149-5138 Mechanical Push/Puller For Extra Force In General Purpose Applications{0700}
1999/02/01 Use FT2613 Cap Assembly For Adjusting 7E-3407 Gas Regulator{1715}
1999/02/01 New Lines Groups Available To Eliminate Leakage In Air Piping{1058,1071}
1999/02/01 New Exhaust Manifold Shield Assemblies Provide Increased Heat Protection For Wastegate Area{1067}
1999/02/01 Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface Inspection{1101}
1999/02/01 New Prechamber Assembly And Ignition Body Assembly In Prechamber Groups{1106}
1999/02/01 New Cylinder Head Gaskets (Combustion Rings) Available{1124}
1999/02/01 New Thicker Jacket Water Side Cover Help Prevent Coolant Leaks{1201}
1999/02/01 Crankshaft Oil Passage Plugs Should Be Checked For Tightness On Some Crankshafts At Engine Overhauls{1202}
1999/02/01 New Intermittent Prelube Basic Pump Group And Bracket Assembly Used{1319}
1999/02/01 Extended Life Coolant (ELC) Now Preferred For 3600 Diesel Engines{1395}
1999/02/01 New Relief Valves Used In Prelube Lines Groups And Starting Motor Air Pressure Regulator Groups{1451,1469}
1999/02/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.