1998/10/01 Caterpillar


Oil Filter Groups For All Commercial 3500 Series Engines Have Been Improved{1306}

Usage:


3508 (95Y1067-UP, 68Z1091-UP),
3512 (49Y921-UP, 65Z944-UP) Industrial Engines;
3508 (6TJ14-UP),
3508B (5PS216-UP) 3512 (2WK80-UP),
3512B (3ZW123-UP),
3516 (9KF109-UP) Locomotive Engines;
3508 (96Y1868-UP, 69Z831-UP),
3508 With EUI (3PS170-UP),
3508B (2BM1387-UP, 7SM168-UP, 1TW240-UP),
3512 (50Y1646-UP, 66Z837-UP),
3512 With EUI (3RS313-UP),
3512B (4TN168-UP, 2GW225-UP),
3516 (29Z1321-UP),
3516 With EUI (3SS298-UP),
3516B (8KN293-UP) Marine Engines;
3508B (3DM142-UP, 3DW152-UP),
3512B (8EM309-UP, 1PW353-UP),
3516B (9AN158-UP, 2FW167-UP) Marine Auxiliary Engines;
3508 (23Z7274-UP, 70Z1020-UP),
3508 With EUI (5X25-UP),
3508B (6PN460-UP, 2HW121-UP, 1FZ264-UP),
3512 (67Z1772-UP),
3512 With EUI (6P36-UP),
3512B (8RM326-UP, 4AW316-UP),
3516 (5SJ636-UP, 25Z6160-UP, 73Z886-UP),
3516 With EUI (7K37-UP),
3516B (7RN656-UP, 1NW117-UP) Generator Set Engines;
G3508 (4WD20-UP, 9TG190-UP, 2JF352-UP) G3512 (4KC587-UP, 5JD57-UP, 7NJ501-UP),
G3516 (3RC1255-UP, 8LD81-UP, 4EK2288-UP, 5PN35-UP8PW336-UP),
G3520 (5XW124-UP) Engines

Description of Change: An improvement has been made to the oil filter groups for all commercial 3500 series engines with an element type filter. The oil filter groups contain a new adapter assembly which provides for better seating of the oil filter elements in the oil filter housing. This improvement will help prevent oil from bypassing the filters during cold start-up due to differences in oil viscosity and manufacturing tolerances of the filter elements when competitive filters are used by the customer.

Adaptable To: The original 2W-8378 Adapter is replaced by the new 155-1690 Adapter Assembly. The original 2W-9299 Filter Housing Cover is replaced by the new 157-0443 Cover Assembly. These components are effective with the serial numbers listed above. The new 155-1690 Adapter Assembly can be adapted to earlier filter groups. An 8.2 mm (.323 in) hole must be drilled in the filter housing in the position indicated by the following drawings.


Right Hand Service


Left Hand Service and/or Auxiliary Housing (Duplex)

Caterpillar Information System:

1998/10/01 New Spacer Plate Gasket Provides Improved Sealing{1221}
1998/10/01 New Connecting Rod Assembly Provides Increased Rod Eye Bushing Retention{1218}
1998/10/01 New High Inertia Camshaft Drive Gear Available{1212}
1998/10/01 New Seal Assembly Used In Turbocharger Group{1052}
1998/10/01 New Coil Kits Replace Shielded Transformer{1554,1561}
1998/10/01 New Carburetor Assembly For G300 Series Engines{1266}
1998/10/01 Flash File Bulletin Board System To Be Discontinued{1920}
1998/10/01 New Injector Sleeve Bore Gauge And Tube Brush Available For Injector Sleeve Bore; New Grommet Available For Unit Injector Electrical Connection{1713,1290}
1998/10/01 New Seawater Pump Manifold Improves Priming{1371}
1998/10/01 Improved 133-9096 Diaphragm Assembly Available For Catalyst Engines{1266}
1998/10/01 Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/09/01 Fabricated Spark Plug Gapping Tool {0766,1555}
1998/10/01 New Gear And New Shaft Assemblies Used In Scavenge Oil Pump Groups{1312}
1998/10/01 3600 High Exhaust Temperature Guided Diagnostics Available In SIS{0372}
1998/10/01 Limited Number Of 105-4365 Electronic Actuator Groups Remain In Parts System{1250}
1998/10/01 3600 Engines Shipped With Oil in the Actuators{1265}
1998/10/01 New Stronger Oil Filter Base Used In Oil Filter Groups{1306}
1998/10/01 Premium Wire Harness Schematics Are Now Available{1408}
1998/10/01 New Combustion Sensor Groups{1555}
1998/10/01 New Valve Improves Fuel Pressure Regulator Adjustment On 3600 Diesel Engines{1715}
1998/10/01 3600 Diesel Marine Monitoring System (MMS) Electrical System Schematic Now Available{7451,7490}
1998/10/01 Corrections To Service Manual Module, SENR5359, SR4B Generator Service Manual{4450}
1998/11/01 O-Ring Seal For Fuel Injection Pump Groups Is Now Serviced {1251}
1998/11/01 Stanadyne Fuel Injection Pumps Now Equipped With Tamper Resistant Fittings {1251}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.