1996/04/15 Caterpillar

Repair Kits Available For Prelube Pump Groups{1319}

Usage:

3600 Family Of Engines

Three repair kits are available to service the 9Y-9992, 9Y-9993, and 9Y-9995 Prelube Pump Groups. These prelube pump groups are attachments for the 3600 Family Of Engines. Chart A lists the components of the 128-2759 General Repair Kit. Chart B list the components of the 128-2760 Shaft Kit. The 128-2761 Gear Kit includes the casing and gear.

The 128-3547 Pump Assembly is available to service all three prelube pump groups. Three motor assemblies are also available to service the three prelube pump groups. The 128-3543 Motor Assembly is available to service the 9Y-9992 Prelube Pump Group. The 128-3544 Motor Assembly is available to service the 9Y-9993 Prelube Pump Group. The 128-3544 Motor Assembly is available to service the 9Y-9995 Prelube Pump Group.

Caterpillar Information System:

1996/04/15 Remanufactured Cylinder Head Groups Available{1100}

1996/04/15 Engine Configuration And Monitoring System Parameter Programming At Initial Startup{1900,1901}

1996/04/15 New Stainless Steel Plate Prevents Formation Of Rust Within Air Inlet And Exhaust System{1063}

1996/04/15 New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}

1996/04/15 129-0372 Primary Fuel Filter/Water Separator Assembly{1260,1263}

1996/04/15 New Gasket For Engines With Water Cooled Exhaust Manifolds{1059}

1996/04/15 New Valve Cover Gasket Helps Prevent Oil Leaks{1107}

1996/03/19 New Liquid Detector Group Used In Jacket Water Low Level Liquid Detector Group{7421}

1996/03/19 New Fault Code Indicates Caterpillar Communication Link Two Problem{1900}

1996/03/19 New Jacket Water Heater Groups Available{1383}

1996/03/19 Remove Unnecessary Clips{1380}

1996/03/19 Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}

1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}

1996/05/09 Radiators Made With Improved Brass Composition To Add Strength At Crimp Joint{1353}

1996/05/09 Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}

1996/05/09 New Stronger Cylinder Head Bolts Used{1100}

1996/05/09 New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}

1996/05/09 Oil Drainback Holes Changed In New Piston Crown{1225}

1996/05/09 New Integral Seal In Water Lines Groups Helps Prevent Coolant Leaks{1380}

1996/05/09 New Extension For Electronic Ignition System (EIS) Transformer Groups{1409}

1996/05/09 New High Temperature Resistant Seal Group And O-Ring Seal Used In Water Pump Groups{1361}

1996/05/09 Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}

1996/05/09 New Software For The Customer Communication Module{1926}

1996/05/09 New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches{4469}