1990/07/01 Caterpillar


Powdered Metal Valve Guides Provide Increased Service Life

Usage:


3406 (4FD) Spark-Ignited Engines

Description of Change: Powdered metal valve guides are used in the cylinder head assembly. The powdered metal valve guides provide improved wear properties.

Adaptable To: The 7E3413 Valve Guide is effective with first production.

NOTE: The inside diameter of the assembled valve guide is to be 9.487 ± 0.025 mm (.3735 ± .0010"). The guide is to be shrunk by means of reducing the temperature of the valve guide to acquire an interference fit. The reduced temperature needed is -62°C (-80°F).

Caterpillar Information System:

1990/07/01 Solenoid Contacts May Corrode In 3T2648 Marine Starter
1990/07/01 Engine Rack Control Assemblies Improved
1990/07/01 New Fuel Setting Screw Cover And Bolt
1990/06/01 "Ugly's Electrical-References" SEBD0983, Now Available
1990/06/01 Testing The Starter On The Engine
1990/06/01 Jump Starting Procedures
1990/06/01 Improved Manufacturing Process Extends Service Life Of New Exhaust Valves
1990/06/01 Check New 1W7578 And Remanufactured 0R2530 Crankshafts For Burr On Thrust Face
1990/06/01 Governor Springs For Sleeve Metering Fuel Systems
1990/06/01 Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect
1990/06/01 New Washers Used In Auxiliary (Sea Water) Pump Group
1990/06/01 New Bolt Improves Serviceability Of Auxiliary (Sea Water) Pump Group
1990/07/01 New Spark Plug Seal Used
1990/07/01 Improved Turbocharger Bearing Kit Available For Parts Service
1990/07/01 Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01 New Water Regulator Prevents Leakage
1990/07/01 New Jacket Water Heater Groups Have New Thermostat
1990/07/01 Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group
1990/07/01 Boss Added To Keep Bolts From "Bottoming Out" In Expansion Tank Groups
1990/07/01 Improved Material Prevents Sagging Of Rear Manifold Section
1990/07/01 New Turbocharger Gas Inlet Housing Used
1990/07/01 Correct Position Of Regulator Housing On Combined Water Lines Group
1990/07/01 Welding On Fuel And Hydraulic Tanks
1990/07/01 Electrical System Damage From High Voltage
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.