Service Parts Available For The 5P4150 Nozzle Testing Group
Usage:
Service parts needed for the 5P4150 Nozzle Testing Group are available. They are listed in Special Instruction "Use of 5P4150 Nozzle Testing Group and 8S2245 Nozzle Cleaning Kit", Form SEHS7292. The parts list included in the next revision of this Special Instruction includes both Caterpillar part numbers and supplier part numbers. Supplier part numbers listed in the Special Instruction are available from:
Owatonna, MN 55060
U.S.A.
Phone: 507-451-5860
Telex No.: 29-0876
Cable Address: TOOLCO
Caterpillar Information System:
1982/12/15 6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/15 New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15 List Of Service Publications
1982/12/15 Crankshaft Has Step At Front Of No. 1 Main Bearing Journal
1982/12/15 Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15 New Flexible Coupling Group Must Be Installed Correctly
1982/12/15 Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/15 New Seal Used On Governor Control Shaft
1982/12/15 New Piston Group Has A Thicker Top Ring
1982/12/15 Improvements Made To Fuel Ratio Control {1278}
1982/11/10 New Gears Will Decrease Noise Level
1982/11/10 Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/15 Removal Of Water Pump Impeller
1982/12/15 New 6V6146 Load Leveler Can Lift Larger Components
1983/01/19 Replacement Seal Group For Raw Water Pump Shaft Now Has All The Seal Parts Plus An Installation Tool
1983/01/19 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19 Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19 Improved Valve Covers Used
1983/01/19 Added Methods To Decrease The Effects Of High Sulfur Fuels
1983/01/19 Parts Service Information For Pistons And Rings
1983/01/19 Correct Installation Of Valve Lifter Prevents Problems With Valve Lash Adjustment
1983/01/19 Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19 Fabricated Fixture Permits Easier Inspection Of Fuel Injection Nozzles
1983/01/19 Spring Seat Enlarger Available For Use On Cylinder Heads