1979/05/09 Caterpillar


New " Drive 6V94 Universal Joint Is Available

Usage:


A 3/8" drive 6V94 Universal Joint (see the Illustration) is available and is shorter than the standard 3/8" drive universal joints. It is 1.56" (39.6 mm) long. The new universal joint can be used with 3/8" drive sockets and drive handles, and is especially useful in applications where access to fasteners is difficult. For example: the fuel pump housing on 3408 and 3412 Engines.

Caterpillar Information System:

1979/05/09 Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block
1979/05/09 New Ring Gears Used In Flywheel Assemblies
1979/04/25 Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25 During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal
1979/04/25 Dowtherm Test Strips No Longer Available
1979/04/25 New Exhaust Valve Has Improved Three-Piece Construction
1979/04/25 Inspection Of Oil Filters In Parts Stocks
1979/04/25 New Oil Cooler Bonnets Used On 3408 And 3412 Engines
1979/04/25 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25 Inspection Of Oil Pump After Long Periods Of Service Can Prevent Engine Damage
1979/04/25 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems
1979/04/25 Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/05/09 Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09 How To Adapt The 5P1759 Tachometer Drive Group (Dealer Tool) To D353 Engines Equipped With Electric Hour Meters When Engine RPM Must Be Checked
1979/05/09 New Oil Pump Has Improved Relief Valve For Better Pressure Control
1979/05/09 Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09 List Of Service Publications
1979/05/09 New Design Exhaust Gasket Used In Air Lines Group
1979/05/09 Change In Part Number Of Water Temperature Regulator Used In Attachment Oil Cooler Groups
1979/05/09 New BrakeSaver Manifold Prevents Oil Leakage
1979/05/23 New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23 New Flywheel Housing Corrects Clearance Problem With Cylinder Block
1979/05/23 New Hose Assembly Will Give Longer Service Life With High Oil Temperatures
1979/05/23 5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.