1979/03/14 Caterpillar


New Oil Filter And Filter Base Assemblies

Usage:




3208 Truck, Industrial, Vehicular and Marine Engines

SUPPLEMENT: 10/24/79

ENGINE NEWS, MARCH 14, 1979, PAGE 1.

To the article "New Oil Filter And Filter Base Assemblies" add the NOTE which follows:

--------------- END SUPPLEMENT ---------------

Description of Change: The oil filter and oil filter base assemblies on the 3208 Engines have been redesigned (changed) to remove the bypass valve from the filter and put it in the filter base. A bypass valve in the filter base gives more control of bypass pressure than a valve in each oil filter.

Adaptable To: The new filter and filter base assemblies are adaptable to 3208 Engines as shown in the chart that follows:

Caterpillar Information System:

1979/03/07 New Exhaust Pipe Connector Makes A Tighter Seal Between Pipe And Manifold
1979/03/07 Retroreflective Tape Makes Phototach Kit Easier To Read
1979/03/07 Window Cover Kit Now Available For ENM Service Meters
1979/03/07 Use SIRS To Keep Service Literature Current
1979/03/07 Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank
1979/03/07 New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07 Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07 New Manifold Assembly Gives More Room For The Lifting Eye
1979/03/07 New Exhaust Valve And Valve Guide
1979/03/07 Engine Mounted Exhaust Brake Systems Can Be Used To Extend Service Brake Life
1979/03/07 High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage
1979/03/07 New Larger Capacity Water Separator Is Available
1979/03/14 New Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1979/03/14 New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14 New Engine Cylinder Block Used
1979/03/14 Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14 8L4525 Flange Is Available Again For Parts Service Of 3192 Marine Transmissions
1979/03/14 Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings
1979/03/14 Maintenance Procedures For Extended FPTO Life On 3408 And 3412 Marine Engines
1979/03/14 Larger Diameter Washer Is Used To Hold Air Transfer Pipe In Aftercooler Flange
1979/03/14 List Of Service Publications
1979/03/14 Revision To Guideline For Reusable Parts Is Available
1979/03/14 Information About The Use Of Earlier Cylinder Heads And Liners With Spacer Plate Cylinder Blocks; List Of Earlier Articles
1979/03/14 Replacement Bushing Available For Cast Iron Rocker Arms Only
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.