1994/07/08 Caterpillar


Transmission Drive Shaft Group Replacement{3253}

Usage:


RT80, RT100 (1GJ1-UP) Telescopic Material Handlers

Description of Change: A transmission drive shaft group is available which can be installed as a service replacement for all former transmission drive shaft groups on the RT80 and RT100 machines.

A parts breakdown of the new 8I-4714 Drive Shaft Group is listed in Chart 1. Early machines equipped with 84-4141 Drive Shaft Groups require the additional parts listed. Refer to Chart 2. The 8I-4714 Drive Shaft Group should be installed as shown in the illustration. Refer to illustration for details. The inset shows the additional parts required to replace the 84-4141 Drive Shaft Groups.


Detailed View of 8I-4714 Drive Shaft Group.

Caterpillar Information System:

1994/07/08 Improved Transmission Oil Filler Tube Mounting{3014}
1994/07/08 New Retrofit Kit Available For Brake Pipe Arrangement{4257}
1994/07/08 Improved Master Cylinder Available{4258,4259,5470}
1994/07/08 Brake System Servicing{4005}
1994/07/08 Avoid Damage to Boom and Attachment Control{5700}
1994/07/08 Alternator Circuit Breaker May Have An Intermittent Fault{1420}
1994/07/08 Improved Mounting Method For Hydraulic Quick Hitch Pins{5133}
1994/07/08 Ensure Brake Hose Is Clear Of Engine Oil Pan{4257}
1992/06/01 Improved Joystick Available For The RT80/RT100 Telescopic Material Handler{5700}
1992/06/01 Rolling Hose Pulley Modification Improves Hose Retention{6460}
1991/12/01 Checking The 838440 Joystick Group{5485}
1991/12/01 Service Parts Available for 838440 Joystick Controller Group. Procedure to Recalibrate the Joystick{5485}
1994/07/08 Extended Shuttle Valve Holder{4289}
1994/07/08 Improved Lubrication Of Attachment Coupler Bushing{5133}
1979/01/10 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10 New 6V87 Gauge Measures Valve Stem Wear
1979/01/10 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group
1979/01/24 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24 Ether Starting Aid Groups Are Now Available
1979/01/24 Current Chart For Dynamometer Adapters
1979/01/24 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter
1979/01/24 List Of Service Publications
1979/03/07 Federal Law Prohibits Tampering With Noise Control Systems
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.