1994/07/08 Caterpillar


Improved Transmission Oil Filler Tube Mounting{3014}

Usage:




RT50 (4XG),
RT50 SA (8DJ) RTC60 (5PF) RT60 (5DG) Telescopic Material Handlers

Description of Change: The bracket which secures the transmission oil filler/dipstick tube to the transmission case has been changed. This change will help to avoid failure due to cracking.

Adaptable To: All machines listed, currently in service.

Procedure

1. Fabricate the new bracket, using a mild steel and the dimensions shown in Illustration 1.

2. Install the bracket using the original hardware. Ensure the bracket can be aligned with both mounting points, without force, before tightening the mounting hardware.


Illustration 1.

Caterpillar Information System:

1994/07/08 New Retrofit Kit Available For Brake Pipe Arrangement{4257}
1994/07/08 Improved Master Cylinder Available{4258,4259,5470}
1994/07/08 Brake System Servicing{4005}
1994/07/08 Avoid Damage to Boom and Attachment Control{5700}
1994/07/08 Alternator Circuit Breaker May Have An Intermittent Fault{1420}
1994/07/08 Improved Mounting Method For Hydraulic Quick Hitch Pins{5133}
1994/07/08 Ensure Brake Hose Is Clear Of Engine Oil Pan{4257}
1992/06/01 Improved Joystick Available For The RT80/RT100 Telescopic Material Handler{5700}
1992/06/01 Rolling Hose Pulley Modification Improves Hose Retention{6460}
1991/12/01 Checking The 838440 Joystick Group{5485}
1991/12/01 Service Parts Available for 838440 Joystick Controller Group. Procedure to Recalibrate the Joystick{5485}
1991/12/01 RT80/RT100 Gearbox Lubrication{3000}
1994/07/08 Transmission Drive Shaft Group Replacement{3253}
1994/07/08 Extended Shuttle Valve Holder{4289}
1994/07/08 Improved Lubrication Of Attachment Coupler Bushing{5133}
1979/01/10 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10 New 6V87 Gauge Measures Valve Stem Wear
1979/01/10 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group
1979/01/24 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24 Ether Starting Aid Groups Are Now Available
1979/01/24 Current Chart For Dynamometer Adapters
1979/01/24 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter
1979/01/24 List Of Service Publications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.