1999/10/01 Caterpillar


ADEM III And ADEM 2000 Test Electronic Control Module (ECM) {1901}

Usage:


3126B (8YL, 7AS),
C-10 (3CS),
C-12 (2KS),
3406E (2WS, 1MM) Truck Engines

ADEM III was used on 3126B (7AS Truck Engines) starting in January, 1998. ADEM 2000 ECM was introduced on 1999 Model Year Heavy Duty truck engines and on the 2000 Model Year 3126B. ADEM 2000 ECM is now used on the above truck engines.

A single test ECM is available to determine if the engine ECM is in working order. This ECM will work on both ADEM III and ADEM 2000 Engines.

The test ECM is NOT available through the Morton Parts System. The Test ECM must be ordered directly from the Tech Center. The Test ECMs are in stock and ready to ship. Use the following procedure to order your ADEM III/ ADEM 2000 Test ECM:

* Send a Fax (created on dealership letter head) to the Caterpillar Tech Center - Attn: Erin Blanch (309) 578-4572
* Specify the ADEM III/ADEM 2000 Test ECM
* Quantity of each
* Name and Address the Test ECM should be shipped to
* Purchase Order Number (To cover the cost of the Test ECM)
* Billing Address
* Dealer Code or TEPS Dealer Code
* Your Phone Number

Caterpillar Information System:

1999/09/01 New Engine Flash Files Available To Allow Use Of The "Auto Retarder In Cruise" Feature With Eaton AutoShift Transmissions{1920}
1999/09/01 Peterbilt OEM Engine Wiring Harness And Related Components{1408}
1999/09/01 New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/08/01 Special Instruction Now Available For Correcting Speed Surges{1408}
1999/08/01 Extended Life Coolant - Still The Coolant Of Choice{1395}
1999/08/01 New Material Improved Durability For STAY CLEAN VALVE(r) In Caterpillar High Efficiency Fuel Filters{1262}
1999/08/01 New Service Manuals And Revised Service Manuals Available{0374,1000}
1999/07/01 New Software Release{1920}
1999/07/01 Special Instructions Are Now Available For Converting Four Cylinder Air Compressor Air Supply From Boosted To Naturally Aspirated, Eliminating Inlet Regulating Valve And Related Maintenance{1803}
1999/07/01 New Stronger Bolts And Washers Help Prevent Oil Leaks At Rear Power Take-Off (RPTO) Flywheel Housing To Block Joint{1157}
1999/07/01 New Spacer Base Allows Use Of New Integral Valve Cover Seal{1107,1119,1120}
1999/06/01 Cat I.D. Version 2.1 Personality Module Now Available{1920}
1999/10/01 3126B Software Defect For Injection Actuation Pressure Driver Test {1920}
1999/10/01 Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01 Improved Jake Brake Solenoids For 1999 3406E Truck Engines {1119}
1999/10/01 Optional Service Replacement Aluminum Piston Cylinder Kit Available {1241,1331}
1999/11/01 EPA Required Low NOx Rebuild Kits On Overhauled Engines{1290}
1999/11/01 138-8440 Component Cleaner May Damage Electrical Connectors{0644}
1999/11/01 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web{1901,1920}
1994/07/08 Improved Lubrication Of Attachment Coupler Bushing{5133}
1979/01/10 New Switch Assembly Used With Exhaust Gas Recirculation System
1979/01/10 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10 New 6V87 Gauge Measures Valve Stem Wear
1979/01/10 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.