1992/03/01 Caterpillar


New Electronic Control Groups (Rack Position Sensor And Timing Position Sensor) Provide Increased Reliability

Usage:


3406B (8TC, 5YG, 2EK) 3406B (4CK1-845) PEEC III;
3406C (4CK846-Up) PEEC III Truck Engines

Description of Change: New electronic control groups are used in the governor and fuel injection pump control groups and timing control groups. The new electronic control groups provide increased reliability.

Adaptable To: When used together, the new 9X7793 Electronic Control Group (rack position sensor) and 4P9667 Collar are direct replacements for the former 9W0493 Electronic Control Group and 4W2592 Collar in the governor and fuel injection pump groups. See Illustration 1. When used together, the new 9X9555 Electronic Control Group (timing position sensor) and 4P9667 Collar are direct replacements for the former 9W0497 Electronic Control Group and 4W2592 Collar in the timing control groups. See Illustration 2.


Illustration 1. Location of 9X7793 Electronic Control Group (1) and 4P9667 Collar (2) in typical governor and fuel injection pump group.


Illustration 2. Location of 9X9555 Electronic Control Group (3) and 4P9667 Collar (2) in typical timing control group.

Caterpillar Information System:

1992/03/01 Troubleshooting Electrical Noise Problems
1992/03/01 Thinner Spacer Plate Available For Parts Service
1992/03/01 New And Improved Operation And Maintenance Manuals Available
1992/03/01 Improved Hose In Turbocharger Oil Lines Group Resists Deterioration Caused By Heat
1992/03/01 Procedure For Putting 9U5839 Liquid Gasket Material On Cylinder Liner
1992/02/01 List Of Service Publication
1992/02/01 New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/01 Be Sure To Use Correct Connector/Connectors Between Fuel Transfer Pump Outlet And Tube To Fuel Filter{1274,1256}
1992/02/01 1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/01 Procedure To Repair Oil Leak At Rear Camshaft Cover{1221}
1992/02/01 New Combustion Seal (O-Ring Seal) Used In Unit Fuel Injection Pump Group{1290}
1992/01/01 The Letter "I" Now Used In Part Numbers
1992/03/01 Videotapes Provide 3406 Truck Engine Maintenance Information
1992/03/01 9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01 New Spring Used In Governor Control Groups
1992/04/01 Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01 Procedure To Repair Damaged Oil Pan Drain Hole Threads
1992/04/01 New Turbocharger Groups With Ceramic Turbine Wheels Used
1992/04/01 Component Cross Reference Lists For Programed Electronic Engine Control (PEEC) Systems
1992/04/01 Be Sure To Use Correct Installation Procedure For Core Plug Block Heaters (Engine Coolant Heaters)
1992/04/01 New Caterpillar Engine Oil Nomenclature
1992/04/01 Engine Oil Recommendations Have Been Changed
1992/05/01 New Components Used In Fuel Ratio Control Groups
1992/05/01 New Turbocharger Groups Help Prevent Surge (Popping)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.