Remove Fuel From Electronic Control Module (ECM) Before Shipping
Usage:
3406B (PEEC) And 3176 Truck Engines
Before shipping, be sure to drain all fuel from ECM's that are removed from the 3406B (PEEC) and 3176 Truck Engines. The presence of fuel in the ECM cooling manifold could cause unnecessary hazards during shipping and handling.
Caterpillar Information System:
1989/01/01 New Screw Used In Brakesaver Water Lines Group
1989/01/01 Correct Timing Specification
1989/01/01 New Head Gasket Available; Head Gasket Replacement Guidelines
1988/12/01 New Mounting Bolts Used In Aftercooler Housings
1988/12/01 Rechargeable Portable Printer Available
1988/12/01 New Camshaft Used; Camshaft Installation Kit Available
1988/12/01 Larger Valve Springs Must Be Used With Williams Blue Ox ® 485 kPa (70 psi) Exhaust Brake; New Spring Compressor Group Available
1988/12/01 Revised Instructions For Installation of New Maintenance Free Batteries
1988/11/01 $25 Rebate For Members Of Caterpillar Truck Engine Owners Club (U.S. Only)
1988/11/01 New Liner Seat Insert Available
1988/11/01 Be Sure To Follow Cooling System Recommendations
1988/10/01 List of Service Publications
1989/01/01 New Special Instruction Available - "Storage Procedure For Caterpillar Products"
1989/01/01 High Performance Maintenance Free Battery Available
1989/01/01 List Of Service Publications
1989/02/01 Troubleshooting 3406B (PEEC) Truck Engines Equipped With Power Demand Cruise Control (PDCC)
1989/02/01 Cold Start Procedures For 3406 (PEEC) Truck Engines
1989/02/01 New Publication Available- "Coolant And Your Engine"
1989/02/01 Surface Marks On Roller Bearing Cages Are Not Cracks
1989/03/01 New Features And Enhanced Fault Codes Available In New PEEC Personality Modules
1989/03/01 Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available
1989/03/01 Improved Magnet Used In Rack Assembly
1989/03/01 New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01 Preventive Maintenance For Batteries