1987/11/01 Caterpillar


Improved Mounting Hardware For Electronic Control Group

Usage:


3406B (PEEC) Truck Engines (8TC)

Description of Change: Improved mounting hardware is used for the electronic control group on 3406B (PEEC) Truck Engines. See illustration.


Improved hardware.

Adaptable To: The chart lists the changes to the 7C3160 and 7C5739 Electronic Control Groups. These improvements are effective with 8TC1349 and are adaptable to all earlier 3406B (PEEC) Truck Engines.

Caterpillar Information System:

1987/11/01 New 8C9705 12 Volt Converter Available To Power The 8T8697 Electronic Control Analyzer Programmer ECAP)
1987/11/01 New Air Powered Scraper Available For Gasket Removal
1987/11/01 New Service Tools Available
1987/10/01 Caterpillar Announces Ambassador Club For Dealer Personnel In The U.S.
1987/10/01 Check Plastic Water Sleeve If Engine Experience Severe Overheating
1987/10/01 Either Type Sleeve Satisfactory For Governor Servo Piston
1987/10/01 New Special Instruction, "using The PEEC Screen Map(s) "
1987/10/01 New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/09/01 Improved Warranty For Remanufactured Parts And Components
1987/09/01 Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01 Remanufactured 3208T Economy Truck Engine Available
1987/09/01 New Hydraulic Steering Mounting Group Available
1987/11/01 Ring Retainer And New O-Ring Seal Used In The Brakesaver Engine Oil Lines Group
1987/11/01 New Water Temperature Regulator Helps Prevent Overcooling
1987/11/01 Results Of High Speed And/Or Overspeeding Of 3406B Truck Engines
1987/11/01 Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/11/01 Additional Parts Required For Installation Of C-336 ® Jacobs Engine Brake
1987/11/01 Intake Valve Seals Used
1987/12/01 Engine Oil Refill Capacity Reduced
1987/12/01 Oil Pan Size Identification
1987/12/01 Improved Valve Mechanism Cover Groups
1987/12/01 New 1U5803 Connector Repair Kit Available
1987/12/01 Earlier Flywheel Housings Can Be Modified For Use With Later Crankshafts
1987/12/01 Adjust Bosch Solenoid If Replaced Or Reinstalled
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.