1982/05/19 Caterpillar


5P3519 Gauge Group Components Available Separately

Usage:


All Engines That Have Pistons With Rectangular Ring Grooves

The separate parts of the 5P3519 Piston Ring Groove Gauge Group are now available. These six gauges were formerly available only as a complete group.

The part numbers of the gauges and their thicknesses are shown in the chart. Later gauges have a scribe line on them. This scribe line can be added to earlier gauges. If the scribe line is visible during use of the gauge, the piston can be used again.

It is Caterpillar's recommendation that the piston ring groove gauges be checked for accuracy regularly with a second set of gauges, which can be kept as a master set.

Guideline For Reusable Parts, "Pistons And Cylinder Liners ", Form SEBF8001-01 has complete instructions for the use of these gauges.


Dimensions of 6V3193 Gauge.

Caterpillar Information System:

1982/05/19 Conversion Of 49-State 3406 Truck Engine From 283 Kw (380 Hp) To 298 Kw (400 Hp) Arrangements
1982/05/19 5P4812 Gauge Group Components Available Separately
1982/05/19 Inspection Marks On Bearings
1982/05/19 List Of Service Publications
1982/05/19 New Crankshaft Main Bearings Used
1982/05/19 Use The Correct Brakesaver Seal Group
1982/05/19 Reminder: Check Valve Lash Adjustment At Correct Intervals
1982/05/19 New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19 Fuel Rack Slots Have Improved Wear Resistance
1982/03/31 New Diaphragm Used In Fuel Ratio Control
1982/03/31 Use 6V6035 Hardness Tester On Crankshafts
1982/03/31 Engine Storage; Engine Start-up After Storage
1982/05/19 Be Sure To Use Correct Water Temperature Regulator
1982/05/19 Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur
1982/05/19 Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts
1982/05/19 Larger Studs Can Be Used With Rear Exhaust Manifolds
1982/05/19 New Exhaust Tubes And Support Used
1982/05/19 Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/06/23 Fuel Ratio Control Is Now Available As A Group
1982/06/23 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance
1982/06/23 List Of Service Publications
1982/06/23 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/06/23 Wrong Water Separator Element Will Not Remove Water
1982/06/23 Carbon Cutting On Piston Top Land
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.