1981/08/18 Caterpillar


New Information System For Engine Gasket Kits

Usage:


Information concerning the use of gasket kits for engines is now available on a special microfiche. The microfiche will be updated and mailed with the Numerical Parts Record (NPR). Gasket kit information formerly appeared on microfiche Technical Partsgrams. This change will keep engine gasket kit information more current.

For identification purposes the words "Gasket Kit" will be printed in large letters in the upper left hand corner of the fiche. In the upper right hand corner will be "Usage Information - Engines." This information formerly appeared in Technical Partsgram SEBD2618.

The new fiche will use the same vertical format and contain the same information as the Gasket Kit Technical Partsgram it replaces. The Technical Partsgram has been canceled.

Caterpillar Information System:

1981/08/18 New Spacers Used With Larger Valve Springs
1981/08/18 Use 6V4805 Valve Seat Extractor Group To Remove Valve Seat Inserts
1981/08/18 Indications Of High Oil Temperatures In Brakesaver Circuit Can Be Caused By Wrong Gauge Connection
1981/08/18 Coolant Conditioner Elements And Their Capacities
1981/08/18 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/08/18 Mailing Of Engine News And Truck Engine News Microfiche Libraries
1981/08/18 Delay Expected In Replacement Of Canceled Service Tools
1981/08/18 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/08/18 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters
1981/08/18 Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines
1981/08/18 Instruction Cards For "Go-No Go " Gauges Now Available
1981/08/18 6V3145 Leveler Now Available
1981/09/09 Troubleshooting The Fuel Ratio Control Group For Low Power Complaints
1981/09/09 Use Of Different Anti-seize Compound Prevents Problems With S.O.S. Tests
1981/09/09 O-Ring Seal Materials And Applications: Use Only The Correct Seal For The Specific Installation
1981/09/09 Certification Film Necessary On Engines Adjusted For High Altitude Operation
1981/09/09 Standard Interval For Oil Changes Now 20,125 Kilometers (12,500 Miles) Or 250 Service Hours
1981/09/09 Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/09/09 6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation
1981/09/09 Different O-ring Seals Used In Exhaust Gas Recirculation Actuator Group
1981/09/09 Top Rings For Pistons Have Two Designs
1981/09/09 New Idler Pulley Groups Improve Service Life Of Vee-belt
1981/09/09 List Of Service Publications
1981/09/09 Explanation Of Differences In Timing Advance Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.