1981/08/18 Caterpillar


6V3145 Leveler Now Available

Usage:


The 6V3145 Leveler can be used as a general purpose lifting tool for easier installation and removal of machine components. As shown in Illustration 1, the leveler has spreader bars which can be adjusted to keep loads up to 2700 kg (6000 lbs) in the desired position during service procedures. Dimension "A" is adjustable from 762 mm (30") to 1168 mm (46 "). The locking bolt holes are 102 mm (4") apart.


Illustration 1. 6V3145 Leveler.

The carriage on the main support beam can be moved by turning the lead screw, which permits fine adjustment of the tilt angle of the component being lifted (Illustration 2). This makes it easier to install components, since the load does not have to be put on the floor to adjust the tilt angle. The lead screw can be turned manually or with air-powered tools.


Illustration 2. Load adjusted to level position by 6V3145 Leveler.

Caterpillar Information System:

1981/07/07 Inspect Piston Skirts During Engine Overhaul Procedures
1981/07/07 Air System Leakage Can Cause Problems With Engine Governor Stability At Low Idle Rpm
1981/07/07 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing
1981/07/07 Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/07/07 List Of Service Publications
1981/07/07 New Gasket Used In Front Housing Group
1981/07/07 Cylinder Liners Can Now Be Reconditioned Automatically
1981/07/07 Replacement Bushings For Delco-remy Electric Starting Motors Must Be Machined For Correct Clearances
1981/07/07 Troubleshooting Water In Shut-off Solenoid Housing
1981/07/07 Caterpillar Cooling System Conditioner (liquid Or Spin On Elements) Can Be Used In Ford Truck Installations
1981/07/07 Use 6V4069 Body Group To Remove Tapered Drive Sleeve
1981/07/07 Correct Use Of Keystone Ring Groove Gauges
1981/08/18 Instruction Cards For "Go-No Go " Gauges Now Available
1981/08/18 Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines
1981/08/18 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters
1981/08/18 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/08/18 Delay Expected In Replacement Of Canceled Service Tools
1981/08/18 Mailing Of Engine News And Truck Engine News Microfiche Libraries
1981/08/18 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/08/18 Coolant Conditioner Elements And Their Capacities
1981/08/18 Indications Of High Oil Temperatures In Brakesaver Circuit Can Be Caused By Wrong Gauge Connection
1981/08/18 Use 6V4805 Valve Seat Extractor Group To Remove Valve Seat Inserts
1981/08/18 New Spacers Used With Larger Valve Springs
1981/08/18 New Information System For Engine Gasket Kits
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.