1981/04/09 Caterpillar


List Of Service Publications

Usage:




This service information has become available since the last list published in the March 6, 1981 issue of Truck Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information current.

Caterpillar Information System:

1981/04/09 Improve Use Of Engine Service Manual Microfiche
1981/04/09 Electrical Information For Egr (exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped
1981/04/09 Clean Electrical Contacts In Exhaust Gas Recirculation (e.g.r.) Switch Group And Cover Assembly Before Installation
1981/04/09 6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal And Installation Of Piston Pin Bearings
1981/04/09 Correct Refill Capacity For Engine Oil
1981/04/09 Cooling System Cleaner Removes Rust And Corrosion
1981/04/09 Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals
1981/04/09 Special Studs And Nuts Available For Exhaust Manifolds On Engines Used In Heavy Load Conditions
1981/04/09 Correction To Torque Specification For Locknuts On Valve Clearance Adjustment Screws Of Engines Equipped With Jacobs Engine Brakes
1981/04/09 6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/09 Low Engine Temperatures: Install Check Valve
1981/03/06 New Governor Spring Available For Specific Engine Applications
1981/04/09 Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09 Use 6V4058 Universal Extension To Remove And Install Starter Bolts
1981/04/09 Fuel Pressure Relief Valve Is Shown Inverted (wrong End Up) In Parts Book Illustrations
1981/04/09 6V3150 Engine Pressure Group Gives Direct Indication Of Manifold Pressure
1981/05/12 Crankshaft Failures; New Thrust Plate
1981/05/12 New Tool Makes Glow Plug Wire Removal Easier
1981/05/12 Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/05/12 Larger Valve Springs
1981/05/12 FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/05/12 New 6V3060 EGR System Tester Group Available
1981/07/07 Correct Use Of Keystone Ring Groove Gauges
1981/07/07 Use 6V4069 Body Group To Remove Tapered Drive Sleeve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.