Service Program Modules Must Be Ordered By Literature Form Numbers{1705,7494}
Usage:
3176 and 3406B (PEEC) Truck Engines;
Off-Highway Trucks Equipped With Payload Monitoring System
SPM's (Service Program Modules) used in the ECAP (Electronic Control Analyzer Programmer) and DDT's (Digital Diagnostic Tools) are now available as literature form numbers only. They must be ordered through the Dealer Literature ordering system. Some form numbers are subscriptions. No matter how many updates of the SPM are issued per year, the subscription fee will be the total cost for the year.
Those who registered their ECAP's and DDT's last spring were not automatically signed up for the subscription service. The only way to receive the latest SPM update is to order the appropriate literature form number.
Caterpillar Information System:
1989/10/30 New Service Tools Available{0600,0700}
1989/10/30 Understanding Four-Wire Windshield Wiper Motors (12 & 24 V){7305,1408}
1989/10/23 New Nut For Lifting Eye Bracket{1122}
1989/10/23 New Shaft Assembly And Lever Assembly Used In Air Shut-Off Group{7418,1078}
1989/10/23 New Water Level Gauge Group For Folded Core Radiators{1353,7422,7479}
1989/10/23 New Crankshaft Counterweight Bolt And Washer Used{1231}
1989/10/23 New Spacer Used In Alternator Belt Guard Group{7168}
1989/10/23 Hand Tool List For 3114 And 3116 Engines{0600,0701}
1989/10/23 How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/16 New Fuel Injector Assemblies Used{1290}
1989/10/09 Cleaning Instructions For Intake Air Filters In Silencer Group {1051,1087}
1989/10/09 Use Fire Resistant Hydraulic Elements To Help Clean Contaminated Hydraulic Systems {5050,5068}
1989/10/30 Exhaust Manifold Gasket Removed From Between Exhaust Sleeve And Manifold Section{1059}
1989/10/30 New MG507 And MG507A Marine Gear Groups; New Marine Transmission Mounting Group{3354,3279}
1989/10/30 New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30 Two Remote Instrument Panels Available: Conventional and EMCP{7002}
1989/11/06 Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06 Narrow Wear Rings Now Used On All Hydraulic Cylinder Rods{4303}
1989/11/06 Different Thread Lubricant Can Be Used On Connecting Rod, Main Bearing Cap And Counterweight Bolts{1203,1225,1231}
1989/11/06 Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/13 Engine Coolant Can Be Recycled{1395}
1989/11/13 New 3161 Marine Governor Provides Better Low Idle Stability{1264}
1989/11/13 New Gasket With Stainless Steel Flange Used In Exhaust Manifold Group{1059}
1989/11/13 Cylinder Liner Changes{1216}