1979/12/17 Caterpillar


Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}

Usage:


The problem of wear caused by sulfur in diesel fuel is serious. At this time, there are confirmed reports of increasing amounts of sulfur in today's crude oils, particularly outside the United States and Canada and in coastal areas. Equipment users can expect to experience this wear at one time or another in the future.

A new full-color brochure entitled "Fuel Sulfur--Your Diesel's Silent Enemy," Form SEBD0526, is available to help users reduce fuel sulfur damage to their diesel engines. The brochure tells what fuel sulfur wear is and why it is on the increase. It also describes the symptoms of fuel sulfur damage and tells what can be done to keep engine damage to a minimum.


"Fuel Sulfur-Your Diesel's Silent Enemy" alerts customers to problems caused by the increased amounts of sulfur in today's diesel fuel.

Caterpillar Information System:

1979/12/10 New Cylinder Heads Are More Rigid And Stronger{1100}
1979/12/10 Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10 Improved 6V2012 Micrometer Depth Gauge Set Has Increased Range To Permit Deeper Measurement{0653,5070}
1979/11/26 Fabricated Tester For Regulator-Exciter Control Assemblies Used On SR-4 And SRCR Generators{0652,4451,4452,4454,4467}
1979/11/26 Former Oil Pump Group Is Now Used Again{1304}
1979/11/26 New Cylinder Block Has More Material Around Liner Seat Area{1201}
1979/11/26 Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26 More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/12 Repair Of Damaged Or Worn Balancer Shaft Bores{1201,0663,1220}
1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}
1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05 Support Plates Must Be Used To Install Earlier Marine Transmissions{3300}
1979/12/17 General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/24 Crankcase Capacity Increased; New Dimensions For Marks On Oil Level Gauge{1318,1302}
1979/12/24 Track-Excited Vibration{4121}
1979/12/24 Too Much Clearance For Exhaust Valves Can Cause Wear To The Camshaft Lobes And Valve Lifters{1105,1210,1209}
1979/12/24 New Linkage Kits With Improved Parts Are Available For Repair Of Front Power Takeoff Clutches{3055,3059}
1989/01/09 Indexes For Special Instruction Microfiche Libraries{0374}
1989/01/09 New Special Instruction Available - "Storage Procedure For Caterpillar Products"{1000,7000}
1989/01/16 Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5100,5200,5300,5450,5550}
1989/01/16 High Performance Maintenance Free Battery Available{1401}
1989/01/23 Be Sure Battery Charger Connections Are Correct{1406}
1989/01/23 New Crankshaft Seal Adapter O-Ring Seal Is Made Of Higher Temperature Material{1160,1161}
1989/01/23 New Procedures To Adjust Woodward EGB29P Governor/Actuator Linkage{1265}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.