1979/10/22 Caterpillar


Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}

Usage:


All Caterpillar Machines Equipped With Motorola Alternators And 6N3160 Voltage Regulators

Some 6N3160 Motorola Voltage Regulators can cause ammeter oscillations on machines equipped with Motorola alternators. This movement will not damage the electrical system and it will have no effect on charging the batteries. If desired, the regulator can be replaced with another 6N3160 Motorola Voltage Regulator that does not have a date code 840 and 852.

Caterpillar Information System:

1979/10/22 New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22 Improved Seal Used In Raw Water Pump On Marine Engines{1371}
1979/10/22 New Valve Rotator And New Oil Shield Are Available{1104,1105,1109}
1979/10/22 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts{0670,1052,1053,1077,1105,1214}
1979/10/22 Cold Temperature Starting Procedures For Air Compressor And Drill Engines{0374,1000,1450}
1979/10/22 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available{1380,1355}
1979/10/22 Use The FT1482 Stop Collar Assembly With The 1P4000 Line Boring Tool Group{0663}
1979/10/15 New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15 Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/08 Supplement To Special Instruction, Form SEHS6895, "Bench Testing Hydraulic Components" Now Available On Microfiche{0650}
1979/10/08 New Hydromechanical Shut-Off Is Available{7418,7403}
1979/10/08 Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/29 New--3208 Engine Maintenance Tips Wall Chart {0374,1000}
1979/10/29 The FT1486 Chain Assembly Can Be Used For Emergency Repair Of Front Power Takeoff Clutches {3055}
1979/10/29 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29 New Repair Kit Is Available For Service Of Hydraulic Jack {0642}
1979/10/29 7N9843 Fuel Injection Valve Nozzle Assembly Now Used In Truck Engines {1254}
1979/10/29 Improved Seal Now Used In Seawater Pump {1371}
1979/11/05 Correct Installation Of Track Shoe Nuts{4170,4179}
1979/11/05 Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05 Support Plates Must Be Used To Install Earlier Marine Transmissions{3300}
1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.