1988/01/04 Caterpillar

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}

Usage:

Reference: Special Instruction, Form SEHS763702, "Operation, Maintenance And Parts List Information For Caterpillar Fuel Injection Test Benches."

The new FT2253 Cable Assembly drawing is available to help repair the Kent-Moore Fuel Injection Test Bench. The FT2253 Cable Assembly replaces the former 1U5153 Cable Assembly which is canceled. The FT2253 Cable Assembly connects the counter reset lever to the counter on the fuel injection test bench.

Dealers in NACD, COSA, and Caterpillar Americas can order drawings for Fabricated Tools (FT) from the address that follows. When ordering, be sure to include your dealer code and address so your request will receive immediate attention. All other dealers can order drawings from their Subsidiary Service Departments.

Caterpillar Inc.
AD180 Publications Print Room
600 West Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Telex: TRT 190425

Caterpillar Information System:

1988/01/04 Part Numbers For Bulk Lengths Of Decal Stripes{7557}

1988/01/04 Be Sure To Follow Correct Procedure When Checking Transmission Primary Clutch Pressures With Transmission Installed In Machine{3150}

1978/12/18 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}

1978/12/18 The FT530 Puller Now Can Do The Work Of Three Pullers{0621}

1978/12/18 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter{1356}

1978/12/18 New Switch Assembly Used With Exhaust Gas Recirculation System{1080}

1978/12/18 Improved Cylinder Head Gasket Now Used{1101,1201}

1978/12/11 New Electric Service Meter Used{7480}

1978/12/11 New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}

1978/12/04 90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}

1978/12/04 New Exhaust Valve Has Improved Three-Piece Construction{1105}

1978/12/04 New Design Brace Used In 4N2905 Air Cleaner Group{1051}

1988/01/04 Die Cast Flywheel Housing Has Less Weight{1157}

1988/01/25 New Undercarriage Reconditioning Bulletin-Sealed And Lubricated Track Servicing Procedure For Non-Restrained Track {4150,0374}

1988/01/25 New Microfiche Shows Part Numbers And Locations Of Decals And Stripes {0374,7557}

1988/01/25 New Bearings Available For Reverse Idler Gear {3300}

1988/01/25 8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}

1988/01/25 New Engine Oil Coolers Have Rubber End Sheets {1378}

1988/02/01 New 1U7646 Coupler Available To Connect 1 "-12 Threaded Studs{0700}

1988/02/01 Replacement Gaskets Available For "V-E" Electrical Connectors{7553}

1988/02/01 New Shaft Used In Auxiliary Sea Water Pumps{1371,1389,1350}

1988/02/08 New Transmission And Engine Oil Cooler Has Rubber End Sheets{1375,1378}

1988/02/15 Assembly Of Face Seals And Connectors{0738,1250,4300,5050}

1988/02/15 Hydraulic Test Bench Fittings Can Be Adapted To Quick Disconnect Fittings{0600,0784,5050}