Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
Usage:
On some engines the socket on the 5P7335 Rack Adjusting Tool will not always completely engage the rack setting locknut. A counterbore can be added in the end of the shaft next to the socket as shown. This gives enough clearance for the socket to completely engage the nut.
Dimensions to give more clearance in the end of the rack setting tool.
Caterpillar Information System:
1978/10/16 Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16 New Switch Group Used In Several Applications{1416}
1978/10/09 5P9736 Bracket-Link Now Available For Parts Service{0644}
1978/10/09 A New 5P9698 Frequency Calibrator Is Available For The Calibration Of Caterpillar Diagnostic Tools{0651}
1978/10/09 New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09 Improvements To The 6N5906 Electric Service Meter{7480}
1978/10/09 4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09 Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09 Never Use Copper Tubing As A Replacement For Steel Brake Lines{4257,7554}
1978/09/25 New 6V1 Seal Kit Available For Service Repair Of High Pressure Tee Test Couplers{0623,7555,5057}
1978/09/25 Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/10/16 New Transmission Mounting Group Has Improved Design For Longer Service Life{1150,3000}
1978/10/16 Tips For Service Information Retrieval System (SIRS) Users{0374}
1978/10/23 Conversion Of Testers In Earlier 1P3550 Wiring Harness Tester Groups To Use Later Test Harness Assemblies With Receptacle Connections{0650,0651,1408}
1978/10/23 5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23 In The Future There Will Be A Common Warning System For All Caterpillar Machines{7450,7301,7400}
1978/10/30 New Fuel Injection Nozzles Are Used In 3208 Truck Engines When Equipped With EGR{1254}
1978/10/30 6V92 Plug Socket Is Available For The Removal And Installation Of Lubricant Plugs{0612}
1978/11/06 Improvement Made To Solenoid In Electric Shut-Off Group{1259}
1978/11/06 New Control Cover Gives Better Control Of Exhaust Gas Recirculation System{1080,1250}
1978/11/13 6V106 Post, 6V107 Stop And 6V108 Cap Now Available For Parts Service Of The 7S1100 Hose Press Arrangement{0660}
1978/11/20 Single Coil Shut-Off Solenoid Used In Place Of Dual (Two) Coil Shut-Off Solenoid{1259}
1978/11/20 Sender Unit For Engine Oil Pressure Gauge Moved To New Location On Truck Cab{7455}