1987/03/23 Caterpillar


Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}

Usage:


Reference: Service Magazine, June 9, 1986, Page 11, "Nitrite Test Kit Available For Cooling Systems."

Helps reduce downtime while protecting your equipment investment.

This inexpensive kit is designed for use on all Caterpillar products with water cooled engines. It's also usable with any other water cooled equipment. The kit provides correct preventive maintenance of cooling systems.

You get validation of 100% acceptable concentrations of ethylene glycol and the coolant conditioners that are normally added every 250 hours of engine running time.


The 8T5296 Coolant Conditioner Test Kit contains a specific gravity tester, dropper pipet, scribed testing vial, Solution A (2), Solution B and testing chart with instructions - all packaged in a zipper pouch.

... Helps assure efficient, trouble-free cooling system operation.

... Helps avoid premature failure of cooling system and engine components and costly, unnecessary downtime and loss of productivity.

Simply adding conditioner is not enough. Guesswork is too risky. That is because insufficient coolant conditioner may result in pitted cylinder liners. And excessive concentrations cause radiator tube blockage and deposit buildup on hot surfaces - resulting in overheating, water pump seal seepage/leakage and cylinder head cracking.

No delays. No guesswork. Complete each test in five minutes, for just pennies with three easy testing steps:

1. Count the floating balls to check antifreeze concentration.

2. Count the drops to check conditioner concentration.

3. Read the chart for clear, simple maintenance directions.

Antifreeze concentrations greater than 60% and coolant conditioner concentrations greater than 6% can be harmful to cooling systems and engines. This 8T5296 Coolant Conditioner Test Kit provides positive proof that concentrations are in a proper or safe range.

For more information on other tools and services Caterpillar offers, contact your local Caterpillar Dealer or call the Service Technology Group tool free:

Outside Illinois: 1-800-542-TOOL
Inside Illinois: 1-800-541-TOOL
Canada: 1-800-523-TOOL
Telex: 404435

Caterpillar Information System:

1987/03/16 Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16 New Voltage Regulators Used On SR-4 Generators{4450}
1987/03/16 Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16 Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/09 Improved Injector Clamp Eliminates Interference With Bridge {1290}
1987/03/09 New Air Cleaner Mounting Brackets Used For Heavy-Duty Air Cleaner Groups {1051}
1987/03/09 Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/02 New Fan Drives Used{1358}
1987/03/02 New 8T5261 Bushing Installer And Remover Adapter Tool Available{0600}
1987/03/02 Water Separator Available{1263}
1987/03/02 Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02 Tools Available To Install Plastic Tie Straps{0709,0738}
1987/03/23 Cooling System Conditioner{1395,1350}
1987/03/23 5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23 Dispenser Available For Shop Towels{0600}
1987/03/23 Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23 Some Components Of The Transmission Mounting Group For Allison AT540 And AT545 Transmissions Are No Longer Serviced By Caterpillar{3279,1013,3009}
1987/03/23 Pleasure Craft Cruise Kits Available{1000}
1987/03/23 Improved Fuel Transfer Pump Cover; Weep Hole Moved{1255}
1987/03/23 Gasket Removed From Flywheel Housing Cover Groups{1157}
1987/03/23 New Clamps And Grommets For Turbocharger Oil Lines{1300,1307,1052}
1987/03/30 New Service Tools Available {0600}
1987/03/30 Piston Cooling Jets No Longer Used In Some Applications {1200}
1987/03/30 Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.