New Adapter Group For Use With Fuel Injection Test Bench{0652}
Usage:
D342, D353, D346, D379, D398, D399 Engines Shipped with Safety Shut-Off Controls
A new 5P7387 Adapter Group is available for use on the fuel injection test bench. This adapter group will permit you to install the safety shut-off controls on the fuel injection test bench to check for correct operation.
This adapter group has a mounting plate, oil supply fitting and two drive adapters. (See Illustration 1.)
Illustration 1. Components of 5P7387 Adapter Group.
Illustration 2. Typical application of 5P7387 Adapter Group.
Caterpillar Information System:
1977/06/06 5P7386 Seal Driver For Hydraulic Pumps And Swing Motor{0622,5058,5070}
1977/06/06 Water Pump Has Stronger Pulley{1361}
1977/06/06 New Tool For Installation Of Tandem Drive Chains On All Series G Motor Graders{0621,4063}
1977/06/06 Improvements To Fuel Injection Pump And Governor{1286}
1977/05/30 Fabricated Tools For Assembly And Disassembly Of 7271 Marine Transmission{0621,3300}
1977/05/30 Improvements To Aftercooler Water Lines{1063,1380}
1977/05/30 Self Locking Bolts Or Hardened Washers Used In Place Of Sheet Metal Locks{3300}
1977/05/30 New Gasket Used At The Outlet Flange On Heavy-Duty Air Cleaner Group{1051}
1977/05/23 Method Of Piloting Power Generator To Engine Improved{1156,1157,4450}
1977/05/23 Install New Plugs To Prevent Oil Leaks At The Oil Filter Base{1306}
1977/05/23 Orifice In Oil Supply Passages Of BrakeSaver Stator Prevent Seal Leakage{1155}
1977/05/23 Parts In 1P3075 Seal Puller Group Available Separately{0621,1160,1161}
1977/06/20 5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20 Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger{0612,1253}
1977/06/27 More Of The Oversize (Larger) Cast Iron Seal Rings Are Available For Clutch Housings And Clutch Pistons{3169,3170}
1977/06/27 Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27 New Aftercooler Housings And Covers Have Improved Design{1063}
1977/06/27 Service Tools For Low Emission Truck Engines With EGR{0650,1059,1080}
1977/07/04 Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons{0664,1214,1216}
1977/07/04 Use New Procedure To Tighten Flywheel Housing Bolts{1157,1201}
1977/07/04 New Seal For Crankshaft{1161}
1977/07/04 New Procedure For Calibration Of 1P3060 Pyrometer Group{0653,1050}
1977/07/11 Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11 Some Earlier Vickers Hydraulic Pump Groups Are Not Available For Parts Service--Some Modification Is Needed To Install Replacement Pump Groups{5055}