1984/10/01 Caterpillar


New Cylinder Block Groups Used{1201}

Usage:


All 3400 Series Engines

Description of Change: New cylinder block groups are used on all 3400 Series Engines. These new cylinder blocks have a top deck that is approximately 5 mm (.2") thicker. This thicker top deck helps prevent movement of the cylinder liner in the cylinder block. This movement can cause damage (erosion) to the cylinder block in the area below the cylinder liner flange.

Adaptable As: The new block groups are direct replacements for the former block groups as shown in the chart.

Caterpillar Information System:

1984/10/01 New Gaskets Give A Better Seal To Watercooled Exhaust Manifolds{1059}
1984/10/01 Pressure - Force Conversion Decals Available{0617}
1984/10/01 New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01 Tool Drawings Available For Testing Altronic Magnetos On 2P2340 Magneto Test Bench{0709,0712,0767}
1984/10/01 Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
1984/09/17 New Fittings Used In Fuel Filter Lines Group{1274}
1984/09/17 New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
1984/09/17 New Service Tools Available{0600}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 Differential Oil Pressure In Oil Filter Housing Can Be Checked With A Differential Pressure Gauge{1306,1318}
1984/09/03 Change To Maintenance Interval For Valve Lash Adjustment{1105,1102}
1984/10/01 Helper Spring Groups Improve Operation Of Air Shutoff Groups{7400,7418}
1984/10/01 Improved Oil Separator Elements Have Longer Service Life{1317,1202,1161}
1984/10/08 Make Sure There Is Clearance Between The Propeller Shaft Fastener And The Transmission Output Flange{3305}
1984/10/08 Information For Reversing Crankshaft Rotation Of All 6.25" Bore V8, V12 And V16 Engines{1000}
1984/10/08 Wiring Changed On Voltage Regulators{4467}
1984/10/08 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter{0776,0785}
1984/10/08 Deflection Of Flywheel Housings Should Be Controlled During Transportation{1157}
1984/10/15 Seal Kits Available For Hydraulic Cylinders{5050}
1984/10/15 New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15 New Continuity Testing Light Available{0600,0785}
1984/10/15 New Water Temperature Regulator Has Higher Temperature Setting{1355}
1984/10/15 New Indicator Lamps Used On Generator Control Panels{7002}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.