Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
Usage:
Important changes have been made to the procedure and tools for installation of 5P6595 Inserts in cylinder liner seats. A new 6V164 Driver Plate and 6V4987 Guide Plate are available for use during this installation.
Special Instruction Form SMHS7049-01 has complete installation information. Dealers must destroy all old instructions and use only Special Instruction Form SMHS7049-01 for correct information.
New 6V164 Driver Plate and 6V4987 Guide Plate.
Caterpillar Information System:
1982/05/03 6V4960 AC Current Probe Will Measure Current Easier{0652}
1982/04/26 Expansion Tank Changed To Permit Installation Of Water Level Gauge{1354,7470}
1982/04/26 Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts{1315,1304}
1982/04/19 New Broken Link Spring Used In Governor{1264}
1982/04/19 Improvements Made To 6V3000 Sure Seal Repair Kit{0611,1408}
1982/04/12 Use Correct Size Bolt To Install 5P9736, 6V2156 Or 6V2157 Link Brackets{0644}
1982/04/12 New Seals Improve Pressure Regulator Group{3185,3012}
1982/04/12 Make Sure Hydraulic Pumps Are Installed Correctly{5055,5070,5073}
1982/04/12 Lock Screw For Threaded Crown On Hydraulic Cylinders No Longer Used{5000}
1982/04/12 Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12 Pressure Regulator Group Now Available For Parts Service{3152,3185,3166,3012}
1982/04/05 Reminder: Check Valve Lash Adjustment At Correct Intervals{1102}
1982/05/03 New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03 Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03 Use New 6V4910 Clamp-On Ammeter For Easier Electrical Current Measurement{0651}
1982/05/03 Use The Correct BrakeSaver Seal Group{1155}
1982/05/03 Use 6V6018 Skiving Vise To Hold XT Hose Assemblies{0623,0626,7554}
1982/05/03 Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/10 Larger Press And Improved Tooling Now Available To Fabricate XT Hose{0623,0624,0664}
1982/05/10 Bolts Now Used Instead Of Studs To Hold Cylinder Heads{1101,1201}
1982/05/10 New Exhaust Tubes And Support Used{1061,1067}
1982/05/10 New Crankshaft Main Bearings Used{1203}
1982/05/10 New Mounting Bracket For Mechanical Shut-Off Cable{7418}
1982/05/10 5P4812 Gauge Group Components Available Separately{0653,1215}