1981/12/07 Caterpillar


New Inlet Lines Used In Radiator Group{1353,1380}

Usage:


768C Tractors;
769C Trucks

Description of Change: Inlet lines with a new design are used in the radiator group on 768C Tractors and 769C Trucks. Three new tubes are used between the water temperature regulators and inlet openings in the radiator top tank. See the illustration. Also, two flexible connections are used with the tubes to permit easier assembly and installation.

Formerly, one tube assembly and a flexible connection were used on each side of the radiator. With only one flexible connection, there have been some problems with alignment of the inlet lines during installation.

Adaptable As: The new parts, when used together are a direct replacement for the former parts as shown in the chart.


Installation of new parts.

Caterpillar Information System:

1981/12/07 New Air Cleaner Group Has Six Clamps For Improved Seal{1051}
1981/12/07 6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07 New Core Assembly Used In Transmission Oil Cooler Group{1375}
1981/12/07 Increased Lubrication For Transmission Planetary Gears{3154,3176}
1981/11/30 New Duo-Cone Seals Use Seal Rings Made Of Steel Instead Of Cast Iron{7555}
1981/11/23 Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23 Lateral Stabilizer Bracket Available As A Replacement Part{7051,7203}
1981/11/23 New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23 Use Of Metric Fasteners{7553,0683,1000}
1981/11/23 New 6V4190 Auto Programmer Group And 6V4865 Auto Programmer Connector Used With 6V2100 Multitach{0651}
1981/11/16 New Clutch Disc Used{3155}
1981/11/16 Locating Special Instructions Quickly And Easily Using Microfiche{0374}
1981/12/14 New Valve Seat Used In Shift Pressure Valve Group{3152,3167}
1981/12/14 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals{1350}
1981/12/14 6V4111 Adapters Available To Pull Spoke-Type Sprockets{4164,0623}
1981/12/14 New Flywheel Housing Gasket Used{1201,1157}
1981/12/14 New Oil Level Gauge Used To Prevent Vibration{1300,1318,7450}
1981/12/14 How To Remove The 7L4511 Sleeve Assembly From Aftercoolers{0620,1063}
1981/12/14 New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14 New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/21 Shorter Bolt Gives Clearance For Wiper Motor Linkage{7305,7300}
1981/12/21 Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1982/01/11 Check 14 Test Points In Less Than 5 Minutes With The 6V2150 Starting/Charging Analyzer Group{0651,1518,1406}
1982/01/11 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.