1980/06/02 Caterpillar


New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}

Usage:


1100, 3100, 3204 and 3208 Engines In All Applications

A new cylinder sleeve is available for repairs of worn and/or damaged cylinders in the above engines. The sleeves can be used for repairs of cylinders which have very small holes, cracks and deep scratches in the wall.

The 9N6275 Cylinder Sleeve is adaptable to all 1100, 3100, 3204 and 3208 Engines in all applications.

The cylinder bores must be made larger and the sleeve must be machined after it is installed.

Special Instruction Form SMHS7638, which is sent with each sleeve, has the information needed for installation.

Caterpillar Information System:

1980/06/02 Oil Pump Drive Sleeves Now Available Separately For Parts Service{3300}
1980/06/02 Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02 Improved Procedure Can Be Used To Adjust Voltage Gain{4467}
1980/05/26 6V6 Electrical Connector Pliers Available{0613}
1980/05/26 Four Fabricated Tools Available To Adjust Carrier Bearing Preload And Backlash (Tooth Clearance) For Bevel Gear And Pinion{0611,3258,3256,3257}
1980/05/26 New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26 6V97 Engine Stand Is Available{0626}
1980/05/19 New Plug With Straight-Threads Used In Engine Variable Timing Drive{1272}
1980/05/19 "Viscor Cup" Available To Check SAE J967 Calibration Fluid For Fuel Injection Test Bench{0651}
1980/05/19 Turbine Wheel Shroud Design Changed; Snap Ring No Longer Used{1052}
1980/05/19 Important: 7V2253 Anti-Creep Slides Must Be Correctly Installed, And Adjusted With The Seat Belt{7327}
1980/05/12 Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}
1980/06/09 6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09 Check For Short Circuit In Rotor Field Windings If Low AC (Alternating Current) Voltage Is A Problem{4455,4457}
1980/06/16 6V3115 Repair Kit Is Available{0611,1380,1353}
1980/06/16 6V3075 Dial Indicator (Metric) Is Available{0653}
1980/06/16 Timing Groups To Be Canceled{0654,1250}
1980/06/23 Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System{1305,1318}
1980/06/23 Improved 2P2342 Hose Group Is Available For Beadless Tires{0611,4211}
1980/06/23 Check Retainer Screw Depth In Plastic Pads Of 5P8637 Crankshaft Support Groups{0665}
1980/06/23 In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units{1230,1203,1219}
1980/06/23 Do Not Add Caterpillar Cooling System Conditioner (Corrosion Inhibitor) To New Machines Before Delivery; Cooling System Conditioner Service Interval Changed{1350}
1980/06/23 Check Journal Hardness On Reground Crankshafts{1202,1203,1219,1230}
1980/06/23 Follow Correct Procedures For Installation Of Fuel Filters And Priming The Fuel Systems{1261,1258}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.